Circutor CVMk MODBUS communication protocol
Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions
Supported device types and versions
MODBUS RTU MASTER supports data reading from the analyzers Circutor CVMk.
Communication line configuration
- Communication line category: Serial.
- Parameters of asynchronous line depending on the design and type of device connection – see literature about Circutor.
Communication station configuration
- Communication protocol: MODBUS Circutor CVMk.
- Station address is a decimal number in the range of 0 up to 255 or a hexadecimal number with a hash at the beginning (e.g. #1A).
Station protocol parameters
There can be defined the following parameters:
Table 1
| Key word | Full name | Meaning | Unit | Default value |
|---|---|---|---|---|
| RC | Retry Count | Number of retry calls when an error in communication occurs. | - | 2 |
| RT | Retry Timeout | Delay between retry calls if an error in communication occurs. | ms | 200 millisec. |
| WFT | Wait First Timeout | First waiting on the response after sending a call. | ms | 100 millisec. |
| WT | Wait Timeout | Delay between the readings of a response until it is completed. | ms | 100 millisec. |
| MWR | Max Wait Retry | Number of retry response reading until it is completed. | - | 15 |
String with protocol parameters is written according to this rule:
Key_word=value;Key_word=value;...
Example:
RC=1;RT=500;
If a key word with valid value has not been found in the initial string, default value is used according to Table 1.
I/O tag configuration
I/O tags: Ai
Address – decimal number in the range of 0 to 65535 – number of MODBUS double register, or a hexadecimal number with a hash at the beginning (e.g. #0ABC).
The values are read by 2 registers and interpreted as a 4 byte integer. The addresses of values are described in literature about Circutor.
Literature
-
Changes and modifications
-
Document revisions
- Ver. 1.0 – May 9, 2000 – creation of document
Related pages:
0 komentárov