Incos PMEL 04 communication protocol

Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Supported device types and versions

The communication with the impulse power meters Incos/VUVT PM_EL 04 involves obtaining:

• accumulated work for 3 tariffs
• instantaneous power
• quarter-hour power consumption, including the archival data

Communication line configuration

• Communication line category: Serial, SerialOverUDP Device Redundant.
• Communication line parameters - according to the device settings.

Communication station configuration

• Communication protocol: Incos/VUVT PMEL 04.
• A station address is a decimal number (or a hexadecimal number with a hash at the beginning, e.g. #0A) - according to the settings of PMEL configuration jumpers.
• Time synchronization of the station is required.

Station protocol parameters

Communication station - configuration dialog box - tab "Protocol parameters".
They could influence some optional protocol parameters. You can set the following parameters:

Table 1

I/O tag configuration

• I/O tags: Ai, Di, TiA, TiR.
• I/O tag address is a decimal number in the range 0 up to 255 or a hexadecimal number with a hash at the beginning (e.g. #1A).

Table 2: I/O tag addresses distribution:

Table 3: Di values, status bits (PMEL04A only):

Di values, digital inputs (only PMEL04B), addresses 0 up to 15.

Table 4: Di values, status bits (only PMEL04B):

Literature

-

Changes and modifications

-

Document revisions

• Ver. 1.0 - February 18, 2000 - Creation of document
• Ver. 1.1 - March 13, 2008 - Updating