Hydrolab DATASONDE 4a communication protocol
Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions
Kotva | ||||
---|---|---|---|---|
|
...
Kotva | ||||
---|---|---|---|---|
|
...
- Communication protocol: HYDROLAB DataSonde 4a
- Station address is not used.
...
You can configure the following I/O tags:
Table 1
Key word | Full name | Meaning | Unit | Default value | ||||||
---|---|---|---|---|---|---|---|---|---|---|
| Wait Timeout | Delay between reading the line. | ms | 1000 ms | ||||||
| Max Wait Retry | Maximum retries of reading the response until it is completed. | - | 35 |
String with protocol parameters is written according to this rule:
...
These data are separated by blank space and ended by CR and LF characters. The address defines the index of value ranging from 1 (or as a hexadecimal number with a hash at the beginning, e.g. #0A). Value type TIR may be used for value with index 1 – it is a device time.
...