Page tree
Skip to end of metadata
Go to start of metadata

MEN-SMB2 device communication protocol

Description  
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Description


MEN-SMB2 device protocol is used to control input-output peripherals with integrated SMB2 interface for devices produced by MEN.

Communication line configuration


  • Communication line category: API

Communication station configuration


Station address

Address of station is a text identifier of SMB2 interface. Its name can be found in "Device Manager", Device Settings tab.

Station address

Station protocol parameters

Parameter Meaning Default value
Full Debug Logging is enhanced with listings that enables fast error detection. NO

I/O tag configuration


Possible I/O tag types for variable mode: Ai, Ao, Ci, Co, Di, Dout


I/O tag address

Address of I/O tag is entered in decimal format. For example, this protocol may be used to control the LED indicators. The address of registry, which is used do configure them, is "0x40". I/O tag address will be "64". This I/O tag will return 1-byte information about state of LED indicators. If only one LED diode should be controlled, I/O tag address can be for example "64.3". I/O tag defined such way will control third LED diode.

Literature


-

Changes and modifications


-

Document revisions


  • Ver. 1.0 – 25.5.2015 - creation of document
Write a comment…