Vidíte historickú verziu tejto stránky. Pozrite si aktuálnu verziu.

Porovnať s aktuálnou verziou Zobraziť históriu stránky

« Predchádzajúce Verzia 2 Aktuálny »

MEN-SMB2 device communication protocol

Description  
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Description


MEN-SMB2 device protocol is used to control input-output peripherals with integrated SMB2 interface for computers produced by MEN.

Communication line configuration


  • Communication line category: API

Communication station configuration


Station address

Address of station is a text identifier of the SMB2 interface. Its name can be found in "Device Manager", Device Settings tab.

Station address

Station protocol parameters

ParameterMeaningDefault value
Full Debug
Logging is enhanced with listings that enable fast error detection.NO

I/O tag configuration


Possible I/O tag types for variable mode: Ai, Ao, Ci, Co, Di, Dout


I/O tag address

The address of the I/O tag is a 16-bit number entered in decimal format. For example, this protocol may be used to control the LED indicators. The address of the register, which is used to configure them, is "0x40". I/O tag address will be "64". This I/O tag will return 1-byte information about the state of LED indicators. If only one LED diode should be controlled, the I/O tag address can be for example "64.3". I/O tag defined in such a way will control the third LED diode.

Literature


-

Changes and modifications


-

Document revisions


  • Ver. 1.0 – 25.5.2015 - the creation of the document

  • Žiadne štítky