Vidíte historickú verziu tejto stránky. Pozrite si aktuálnu verziu.

Porovnať s aktuálnou verziou Zobraziť históriu stránky

« Predchádzajúce Verzia 6 Ďalej »

%AddIntervalLocal function


Function
The function adds relative time TimeR to absolute time TimeA. A result is value of Absolute time type.
Declaration
TIME %AddIntervalLocal(
   TIME in TimeA,
   REAL in TimeR,
   TEXT in timeZone := %GetCurrentTimeZone()
 )
Parameters
TimeAAbsolute time.
TimeRRelative time.
timeZoneName of the time zone used for conversion to local time (e.g. "Europe/London") or definition of fixed offset from UTC using format "(+|-)hh[:mi[:ss]]", where hh defines a number of hours, mi defines a number of minutes, and ss defines a number of seconds. Sign as well as a number of hours are mandatory parts of offset definition, number of minutes and seconds are optional and default to 0 (e.g. "+02:30" defines offset of 2 hours and 30 minutes from UTC). The empty text has the same meaning as function %GetCurrentTimeZone.
Note: For historical reasons, an integer parameter is also accepted. Its interpretation is as follows: 0 - zone "Europe/London", 3600 - zone "Europe/Bratislava", 7200 - zone "Europe/Kiev", 21600 - zone "Asia/Almaty". Usage of integer parameter is deprecated and generates warning into log file!
Description
The function %AddIntervalLocal adds relative time to absolute one. The result will not be influenced by the fact that the time jump (between summer and winter time) was or was not performed in this interval. E.g., if 3 hours are added to 1:00 a.m., the result is always 4:00 a.m.
Example
; =================================================================
;  Using time zone "Europe/Bratislava"
;  Daylight saving time was observed in year 2009, therefore time shifts occurred.
;  Winter [B] time was 1 hour ahead of UTC, summer [A] time was 2 hours ahead of UTC.
;  Summer time was from 29th March 2009 to 24th October 2009.
;  A3:00:00 is changed to B2:00:00 on Sunday (25th October 2009).
; =================================================================

BEGIN
  TIME _baseTime
  TIME _addLocal1
  TIME _addLocal2

  ; 2009-10-24 23:30:00 UTC / 2009-10-25 01:30:00 UTC+02
  _baseTime := %StrToTimeEx("2009-10-25 01:30:00", "yyyy-mm-dd hh:mi:ss", "Europe/Bratislava")

  ; add 1 hour - result time 2009-10-25 A2:30:00.000 UTC+02
  _addLocal1 := %AddIntervalLocal(_baseTime, 3600, "Europe/Bratislava")
  ; add 2 hour - result time 2009-10-25 03:30:00.000 UTC+01
  _addLocal2 := %AddIntervalLocal(_baseTime, 7200, "Europe/Bratislava")
END
  • Žiadne štítky