História stránky

...

MEN-SMB2 device protocol is used to control input-output peripherals with integrated SMB2 interface for devices computers produced by MEN.

Kotva
komunikacna_linka komunikacna_linka

Communication line configuration

...

• Communication line category: API

Kotva
komunikacna_stanica komunikacna_stanica

Communication station configuration

...

Address of station is a text identifier of the SMB2 interface. Its name can be found in "Device Manager", Device Settings tab.

Image Modified

Station protocol parameters

Kotva
merane_body merane_body

I/O tag configuration

...

Possible I/O tag types for variable mode: Ai, Ao, Ci, Co, Di, Dout

I/O tag address

Address The address of the I/O tag is a 16-bit number entered in decimal format. For example, this protocol may be used to control the LED indicators. The address of registrythe register, which is used do to configure them, is "0x40". I/O tag address will be "64". This I/O tag will return 1-byte information about the state of LED indicators. If only one LED diode should be controlled, the I/O tag address can be for example "64.3". I/O tag defined in such a way will control the third LED diode.

Kotva
literatura literatura

Literature

...

Kotva
revizie revizie

Document revisions

...

• Ver. 1.0 – 25.5.2015 - the creation of the document
  
  

...