Fisher-Rosemount RS3 RNI communication protocol

Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Kotva
typy_verzie typy_verzie

Supported device types and versions

...

The protocol allows implementation supports reading and writing data into Fisher-Rosemount RS3 system by means of RNI Ethernet network driver (Remote Network Interface) -there is used a TCP/IP network communication is used.

Communication uses the following methods for data acquisition from RNI:

• DDS: Dynamic Data Server – acquisition of process tag values when they on-change.
• RW Services: Read/Write Services – used for value writing values into RS3.

The methods are described in the Fisher-Rosemount Systems RNI Programmer’s Manual documentation, Software Version 2.3, April 1997.

...

• communication line category: API,
• The For the other parameters - see the D2000 System configuration.

Kotva
komunikacna_stanica komunikacna_stanica

Communication station configuration

...

• communication Communication protocol: Fisher-Rosemount RNI.
• Station address consists of the following parameters :
  • RNI Name – RNI name allows

...

• • finding RNI IP address (in the Windows NT OS

...

• • , the name together with the IP address is stored in the file %SystemRoot%\system32\drivers\etc\hosts)
  • Name – user access name (it is configured together with access rights on the boot PC for RNI in the

...

• • userfile.cfg file – see the RNI configuration manual)
  • Password – password to given access menu

You must pay attention when you select the user's access right (D2000 KOM)  - if there is required writing to RS3 is required, the user access rights must be CONFIGURE.

Kotva
merany_bod merany_bod

I/O tag configuration

...

Possible types: Ai, Ao, Ci, Co, Di, Do, TiA

Address The address is the name or address of of the I/O RS3 tag. For analog I/O tags, the address can be defined in the following forms:

SYSTEM_3_TAG_NAME
SYSTEM_3_ADDRESS
SYSTEM_3_TAG_NAME.COMMAND
SYSTEM_3_ADDRESS.COMMAND

For example:

AI-701 - AI-701 tag output (Q)

=1H-01 - tag output (Q) of tag =1H-01

AI-701.B - B input of AI-701 tag

=7A-02.@ - all @ tag flags of tag =7A-02 as a 16-bit unsigned integer

For digital tags, the I/O address can be defined in the following forms:

SYSTEM_3_TAG_NAME.COMMAND\FLAG
SYSTEM_3_ADDRESS.COMMAND\FLAG

Or if COMMAND is @:

SYSTEM_3_TAG_NAME.@FLAG
SYSTEM_3_ADDRESS.@FLAG

For example:

AI-702.U\d

=1H-1.U\c

AI-702.@e

=1H-1.@a

Note:

1. The RS3 tag name is each valid tag name.
2. RS3 address is in form of =NXXNNN form for I/O blocks and in =NX-NN form for control blocks, where N is a number and X is a character.
3. System flags and 'User' flags that are read as analog values are represented by a 16-bit unsigned integer.

The following table contains valid ‘command’ names for RNIDDE. The first column contains the short name of RS3 I/O tag as the letter of T, the tag name is followed by the character (.) and a ‘command‘.

When you configure an I/O tag, you must select one of four radio buttons (UR1 to UR4) of the parameter Update rate. The update rate is used to assign the I/O tag to one of the Update Rate groups. The Update Rate groups are used by the DDS service and defines they define a period of reading data read period from the RS3. The update rate is configured Update Rate groups are configured on the boot booting computer in the file dds.cfg file.

Kotva
literatura literatura

Literature

...

Kotva
revizie revizie

Document revisions

...

• Ver. 1.1 – February 9th, 2000 – Document update.

...