...
If the ICCP connection is initiated by D2000 (the Initiate address parameter), you must enter a valid hostname of the ICCP server according to the above-mentioned rules. If, on the contrary, D2000 accepts the received request for ICCP connection, you must enter the text "ALL" to the Host field. It means that the D2000 System will listen on all interfaces that belong to the particular server (with running D2000 KOM process). If the listening is required only on the particular interface, enter the IP address of this server interface in INET format.
Note: When the D2000 KOM process works as an ICCP Server, it is able to operate more ICCP Clients at the same time.
If D2000 System initiates this connection (the Initiate address parameter), you must also enter the port number on which a target ICCP server listens. The ISO over TCP/IP protocol uses port 102. If D2000 System only accepts the incoming connections, the port number is not used (enter for example 1). The number of bound TCP port is defined by the line protocol parameter "Bind TCP port". This feature enables the operation of ICCP protocol as a client and server simultaneously.
...