IEC62056-21:2002 File I/O communication protocol
Supported device types and versions
Communication line configuration
Communication line protocol parameters
Communication station configuration
Station protocol parameters
I/O tag configuration
I/O address
Literature
Changes and modifications
Document revisions
Supported device types and versions
...
If a directory is entered (in case of a Win32 platform with a backslash (\) at the end), all files that match the mask are processed (see station Station protocol parameters).
- Archive directory -path to the directory, where the processed files are archived. If the directory is not specified, the processed files will be deleted.
...
Dialog window communication line configuration - Protocol parameters tab Protocol parameters, select the "IEC62056-21:2002 File I/O" protocol.
...
| Parameter | Description | Unit | Default value |
|---|
| Analyzed profile. | - | P.01 |
| Gorlitz PRM62 Module | Files from device Gorlitz PRM62 are analyzed. | YES/NO | NO |
Archive Subdirectory Time Mask | Mask for creating subdirectories in the main archive directory according to time of file processing or timestamp of the file (if the Input file parameter specifies a directory). | - | rrrrmmdd |
Formatted Codes (Annex C) | Numerical addresses of I/O tags are used according to the specification of IEC62056-21 standard, Annex C.
If numerical addresses are used, the station address is acquired from the value of the object with address D000, the timestamp is acquired from the value of the object with address C001. | YES/NO | NO |
External Command File 1, 2 | The complete path to a periodically called external command file (.cmd). It is used only if a non-empty value has been configured. It is possible to configure two independently executed command files with different periods. | - | - |
External Command File Period 1,2 | Call period of the external command file 1 or 2. | mi:ss | 1:00 |
Call External Command File 1,2 Synchronously | Call external command file 1 or 2 synchronously. | YES/NO | YES |
Ext. Command File After Activation | Complete The complete path to the external command file which is launched at on change of redundancy status to HS. It is called only once and always synchronously. It is used only if a non-empty value has been configured. | - | - |
| Show debug information about processed files. | YES/NO | YES |
| Show debug information with the content of processed files. | YES/NO | YES |
| Show debug information with measured values of the measure points. | YES/NO | YES |
| Period of input directory content check (if the input Input file is parameter specifies a directory). | mi:ss | 1:00 |
Unknown Files Backup Directory | File, where unknown files are saved (if the Input file is directory). If it is not written, the files will be cancelledcanceled. The unknown files are the files inconvenient to not-matching the configured mask (see station Station protocol parameters) or the station with the required device number was not found. | - | - |
| Time data filter. If the time stamp timestamp of acquired values is different newer from the current time by more than stated the configured number of hours in future, they are ignored. Enter 0 (zero) to ignore the time filter. | hours | 24 |
| Time data filter. If the time stamp timestamp of acquired values is different older from the current time by more than stated the configured number of hours in past, they are ignored. Enter 0 (zero) to ignore the time filter. | days | 31 |
Abnormal Timestamp Data Dir | Directory where the files with ignored data by time filter will be saved (Future Data Filter and History Data Filter). | - | - |
| Timeout, it is inserted after the file was analyzed. | ss.mss | 0.100 |
| Error file to write information about errors during processing (unknown file in directory, too old or too new values). Empty value means that this error file will not be created. | - | - |
...