...
Communication line - configuration dialog box - Protocol parameters tab.
They influence some optional protocol parameters. The following line protocol parameters may be set:
Table 1
Parameter | Meaning | Unit /size | Default value |
---|
a name="MT">Moxa Moxa Redundancy Check Timeout | A switching period of Moxa redundant equipment in case of longer communication pause. It is relevant only on SerialOverUDP Device Redundant line. | sec | 30 sec |
Kotva |
---|
| komunikacna_stanica |
---|
| komunikacna_stanica |
---|
|
Communication station configuration
...
- Communication protocol "ID-Innovations RFID ASCII Protocol".
- Any address parameters are not required. Only one ID-Innovations sensor may be connected to the line. Because of a random module sending only in the moment of card loading, some conflicts could occur on transmission line.
I/O tag configuration
...
Possible I/O tags: Ci, Co, TxtI.
These three I/O tags must be configured to work properly:
I/O tag | Address | Meaning |
---|
TxtI | 1 | This text input acquires the value of ID read from RFID card. ID of card is a hexadecimal number. |
Ci | 1 | A cardinal input value incremented with every a new ID published in a text I/O tag. |
Co | 1 | After the ID published in TxtI is processed, the same value, as is in Ci, must be written into this I/O tag. This handshaking ensures that no information about the received ID will be lost. |
Literature
...