AMiT ATOUCH32 DB-Net communication protocol
Supported device types and versions
Communication line configuration
Communication station configuration
DB-Net initialization
I/O tag configuration
Errors and problems
Literature
Changes and modifications
Document revisions
| Kotva | ||||
|---|---|---|---|---|
|
...
When using the older versions of ATOUCH32 V2.x, there must be configured just one communication line for DB-Net communication. ATOUCH32 V3.x versions enable so-called multithreading. It means, you may connect more lines, which will communicate in parallel, to ATOUCH32 and speed up the communication. The driver must be initialized only by one line (see "Init File" parameter, note 2). There is still the rule that all lines must be configured within one KOM process in one computer. This may be used in D2000 V9.00.021 rel.021 and higher.
...