Supported device types and versions
Document revisions
...
The SmartCheck from Schaeffler is a compact, innovative, modular online measuring system for continuous monitoring of machinery and process parameters on a decentralized basis. It can be used on assemblies where such monitoring was previously too costly.
The SmartCheck is suitable for early detection of rolling bearing damage, imbalances and misalignments on:
- Electric and geared motors
- Vacuum and fluid pumps
- Ventilators and fans
- Gearboxes and compressors
- Spindles and machine tools
| Kotva | ||||
|---|---|---|---|---|
|
...
The communication with the FAG SmartCheck device has been tested on a device with the following parameters:
...
- An authenticate request is sent to device. This request uses username and password valid for the device.
- The device sends a response, which will indicate, whether the login to the device was successful.
- If the login was successful, D2000 sends a liveChararacteristicValue request is to the device.
- The device sends measured values a response (vibration, temperature, voltage, load, digital speed).
Configuration of communication:
...
The structured variable SV.FAG.SmartCheck.Parameters is used to configure communication. This structure has to be dimensioned to as many rows as there are devices. The meaning of each column is as follows:
...