Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions
This protocol supports data reading from the dataloggers INMAT 64 and INMAT 65 produced by ZPA Nová Paka (Czech republic).
Note:
A device sends data spontaneously (without the request for data). A delay between the transmitted data blocks is 5 seconds.
They are not used.
I/O tags: Ai
The address can be entered as a decimal number or a hexadecimal number with a hash at the beginning (e.g. #A).
The value meaning:
Address | Cycle | Meaning | Units |
---|---|---|---|
0 | 1 | Heat output | GJ/hour |
1 | 1 | 1/4 hourly maximum | GJ |
2 | 1 | Heat output sum | GJ |
3 | 1 | Instantaneous mass flow rate | t/hour |
4 | 1 | Mass flow rate sum | t |
5 | 1 | Temperature | °C |
6 | 1 | Temperature difference [°C] - INMAT 64 or Operating pressure [MPa] - INMAT 65 | - |
7 | 2 | Heat output | GJ/hour |
8 | 2 | 1/4 hourly maximum | GJ |
9 | 2 | Heat output sum | GJ |
10 | 2 | Instantaneous mass flow rate | t/hour |
11 | 2 | Mass flow rate sum | t |
12 | 2 | Temperature | °C |
13 | 2 | Temperature difference [°C] - INMAT 64 or Operating pressure [MPa] - INMAT 65 | - |
-
-