Description
Parameters
Program logs
NMEA receiver settings
Changes and modifications
Document revisions
The gpstime.exe program is used for setting the PC system time according to the time received from the GPS satellite system. The program supports STU-GPS devices (Incos Žilina) and GPS receivers supporting the NMEA 0183 communication protocol (tested on Garmin GPS 35). The request for synchronization of time difference that is greater than 3600 seconds will be ignored.
Command line parameters:
gpstime PortNr [W] [E] [L] [U] [NMEA]
Parameter | Meaning |
---|---|
[PortNr] | Number of the serial port, which the GPS receiver is plugged in. |
[W] | If the detected time difference is greater than 1 second, there will be performed correction of the system time according to the GPS receiver time. |
[E] | Having corrected the system time, the program is to be terminated immediately. If correction is not necessary, the program will be terminated in 30 seconds. |
[L] | Daylight saving time correction - adding +1 hour to a time received from the GPS receiver. |
[U] | Correction - UTC (Coordinated Universal Time) --> UTC+1 (Central European Time). |
[NMEA] | The receiver communicates by means of the NMEA 0183 communication protocol. If the parameter is not defined, there is assumed the communication with a Incos STU-GPS device. |
[Sxxxx]
|
Allows to change the predefined serial port baud rate. For
STU-GPS - the predefined baud rate is 9600 Bauds, for NMEA 0183 protocol
based device - the predefined baud rate is 19200 Bauds. Possible values:
|
LOG_INPUT_DATA | Full listing of communication between gpstime and GPS receiver in case of NMEA protocol. |
DO_NOT_CHANGE_SYSTIME | Program executes all activities except for the time correction (unlike the parameter W, when it does not communicate with GPS receiver). |
In the work directory of the gpstime program directory, there is automatically generated the file gpstime.log containing program activity logs:
Each log contains the date and time when occurred.
When you use receivers supporting the NMEA 0183 communication protocol, the following parameters are required by the gpstime program: