...
Clicking a graphic object with an I/O Tag of TiA (Absolute time - input) type connected to control (the user has sufficient access rights) opens the control window that consists of two tabs:
Object status and control
Object information
| Kotva | ||||
|---|---|---|---|---|
|
...
| 1 | Object name. |
| 2 | Object description. |
| 3 | Current value and technical units of the object. Note: If the object is in the Default value state(see the tabs Default manual ctrl or Default automatic ctrl), there is displayed the text Default value instead of Current value. |
| 4 | Value time. |
| 5 | Object states. |
| 6 | Object value flags (user attributes). There are shown the flags, the value of which is TRUE. |
| 7 | Acknowledges the object value. |
| 8 | Telemetric value of the object. Note: Value is shown if the object is in the Default value state(see the tabs Default manual ctrl or Default automatic ctrl). |
| 9 | Part of the control window for controlling the object. |
 | Opens a dynamic graph. |
 | Opens a multigraph. |
| Edit object. Only when process CNF is running. |
| Inserts the object into the current page of the Browser if opened. If is not opened, clicking the button opens it and inserts the object into the first page of the Browser. |
 | Copies the object name to Clipboard. |
| Kotva | ||||
|---|---|---|---|---|
|
...
The tab allows to set manually a default value of the object along with user attributes (flags). It contains the button Activate, current object value and value time. Clicking the button Activate opens the dialog box to confirm the activation of the Default value status for the object. After clicking the buttons Yes and Execute in that dialog box, the tab Default manual ctrl has the following appearance:
| 1 | Depending on the button Execute in the control window, the button Set is used as follows:
|
| 2 | Clicking the button sets up the default value and value flags ''prepared'' to set by clicking the button Set. Note: The button Execute is in the control window, if the option Acknowledge is checked in the object configuration in the process D2000 GrEditor. |
| 3 | Input mask: full / by transformation palette. |
| 4 | Allows to set a default value. |
| 5 | Opens the dialog box to set flags of the default value. |
Kotva nahradne_automaticke nahradne_automaticke
DEFAULT AUTOMATIC CTRL
| nahradne_automaticke | |
| nahradne_automaticke |
The tab allows to use a value of the control object as the default value. In the mode, the value of the object copies the value of the control object (the option Control object in the I/O tag configuration). Clicking the button Activate opens the dialog box to confirm the activation of the Default value status for the object.
| 1 | Value of the control object. |
| 2 | Time of the control object value. |
| 3 | Flags of the control object value. |
Kotva vstupna_hodnota vstupna_hodnota
INPUT VALUE
| vstupna_hodnota | |
| vstupna_hodnota |
The tab allows to reuse a value of the I/O tag (cancels the use of default value). Clicking the button Activate opens the dialog box to confirm the activation of the Input value status.
| 1 | Value of the object (I/O tag). |
| 2 | Value time. |
| 3 | Flags of the object value. |