Porovnávané verzie

Kľúč

  • Tento riadok sa pridal
  • Riadok je odstránený.
  • Formátovanie sa zmenilo.

...

Clicking a graphic object with an I/O Tag of TxtI (Text input) type connected to control (the user has sufficient access rights) opens the control window that consists of two tabs:

Object status and control
Object information

Kotva
ovladanie_objektu
ovladanie_objektu
Object status and control

...

Objects status dialog windowImage Modified


1Object name.
2Object description.
3Current value of the object.

Note
: If the object is in the Default value state(see the tabs Default manual ctrl or Default automatic ctrl), there is displayed the text Default value instead of Current value.
4Value time.
5Object states.
6Object value flags (user attributes). There are shown the flags, the value of which is TRUE.
7Acknowledges the object value.
8Telemetric value of the object.

Note: Value is shown if the object is in the Default value state(see the tabs Default manual ctrl or Default automatic ctrl).

9Part of the control window for controlling the object.

Image Added

Edit object. Only when process CNF is running.

Image Modified

Inserts the object into the current page of the Browser, if opened. If not, clicking the button opens it and inserts the object into the first page of the Browser.
Image Modified
Copies the object name to Clipboard.


Kotva
ovladanie
ovladanie
The bottom of the tab contains the following tabs allowing to control the object:

...

The tab allows to set manually a default value of the object along with user attributes (flags). It contains the button Activate, current object value and value time. Clicking the button Activate opens the dialog box to confirm the activation of the Default value status for the object. After clicking the buttons Yes and Execute in that dialog box, the tab Default manual ctrl has the following appearance:

Default manual control tabImage Modified


1Input edit box to type a default value (text) of the object.
2Opens the dialog box to set flags of the default value.
3Depending on the button Execute in the control window, the button Set is used as follows:
  1. If the button Execute is NOT in the control window, then clicking the button Set sets up the default value and value flags.
  2. If the button Execute IS in the control window, then clicking the button Set just ''prepares'' the default value and value flags to set.
4Clicking the button sets up the default value and value flags ''prepared'' to set by clicking the button Set.

Note: The button Execute is in the control window, if the option Acknowledge is checked in the object configuration in the process D2000 GrEditor.



Kotva
nahradne_automaticke
nahradne_automaticke
DEFAULT AUTOMATIC CTRL

The tab allows to use a value of the control object as the default value. In the mode, the value of the object copies the value of the control object (the option Control object in the I/O tag configuration). Clicking the button Activate opens the dialog box to confirm the activation of the Default value status for the object.

Default automatic control tabImage Modified


1Value of the control object.
2Time of the control object value.
3Flags of the control object value.


Kotva
vstupna_hodnota
vstupna_hodnota
INPUT VALUE

The tab allows to reuse a value of the I/O tag (cancels the use of default value). Clicking the button Activate opens the dialog box to confirm the activation of the Input value status.

Input value tabImage Modified


1Value of the object (I/O tag).
2Value time.
3Flags of the object value.