Porovnávané verzie

Kľúč

  • Tento riadok sa pridal
  • Riadok je odstránený.
  • Formátovanie sa zmenilo.

...

Clicking a graphic object with a communication station connected to control (the user has insufficient access rights) opens the following control window that consists of two tabs:

Object status and control
Object information

Kotva
ovladanie_objektu
ovladanie_objektu
Object status and control

...

Object status dialog windowImage Modified


1Name of communication station.
2Description of the communication station.
3Current value of the communication station.
4Time when the objects has got the current value.
5States of the communication station.
6Object value flags (user attributes). There are shown the flags, the value of which is TRUE.
7Part of control window for controlling the communication station.
Image Modified
Opens a dynamic graph of the communication station.
Image Modified
Opens a multigraph of the communication station.

Image Added

Edit object. Only when process CNF is running.

Image Modified

Inserts the object into the current page of the Browser if opened. If is not opened, clicking the button opens it and inserts the object into the first page of the Browser.
Image Modified
Copies the object name to Clipboard.


Kotva
ovladanie_stanice
ovladanie_stanice
The bottom of the tab contains the tabs allowing to control the communication station (the tab Manual ctrl).

Kotva
manualne
manualne
MANUAL CTRL

The tab contains buttons to control the communication station.

Manual control tabImage Modified


1Communication protocol of the station.
StartActivate the communication with a station in case that the communication is stopped.
StopStop the communication with the station.
PriorityShort-time preferred communication with particular station.
Start TraceStart communication trace.
Stop TraceStop communication trace.
ConfigurationLoad I/O Tag settings from particular station.
InitData initialization from a sub-station archive.
SpecialHistorical data recovery from a station archive. After clicking the button, it opens the following window for setting the interval from which the historical data from station will be read and mask for specification of I/O tags (only for protocols OPC DA and OPC HDA).



The same action can be started by tell command GETOLDVAL.