Porovnávané verzie

Stará verzia 2

changes.mady.by.user D2000 Dev Team

Uložené

porovnané s

Nová verzia Aktuálny

changes.mady.by.user D2000 Dev Team

Uložené

Kľúč

  • Tento riadok sa pridal
  • Riadok je odstránený.
  • Formátovanie sa zmenilo.

...

The tab allows to set manually a value of the object along with user attributes (flags). It contains the button Activate, current object value and value time. Clicking the button Activate opens the dialog box to confirm the activation of the Manual control status for the object. After clicking the buttons Yes and Execute in that dialog box, the tab Manual ctrl has the following appearance:

Manual control tabImage Added

1Input edit box to type a value (text) of the output object.
2Opens the dialog box to set flags of the output object value.
3Depending on the Execute button, the SET button is used as follows:
  1. If the Execute button is NOT in the control window, then clicking the Set button sets up given output object value along with value flags (attributes).
  2. If the Execute button IS in the control window, then clicking the Set button just ''prepares'' given output object value along with value flags (attributes) to set.
4Clicking the button sets up the given output object value and value flags ''prepared'' to set by clicking the button Set.

Note: The button Execute is in the control window, if the option Acknowledge is checked in the object configuration in the process D2000 GrEditor.

5

Maximum step - limit the maximum possible change of the entered parameter (step)

  • button to set the lower limit of possible change from the current value
  • value of the maximum possible change
  • button to set the upper limit of the possible change from the current value


Kotva
automaticke
automaticke
AUTOMATIC CTRL

...

The tab allows to set manually a default value of the object along with user attributes (flags). It contains the button Activate, current object value and value time. Clicking the button Activate opens the dialog box to confirm the activation of the Default value status for the object. After clicking the buttons Yes and Execute in that dialog box, the tab Default manual ctrl has the following appearance:

Default manual control tabImage Added

1Input edit box to type a default value (text) of the object.
2Opens the dialog box to set flags of the default value.
3Depending on he button Execute in the control window, the button Set is used as follows:
  1. If the button Execute is NOT in the control window, then clicking the button Set sets up the default value and value flags.
  2. If the button Execute IS in the control window, then clicking the button Set just ''prepares'' the default value and value flags to set.
4Clicking the button sets up the default value and value flags ''prepared'' to set by clicking the button Set.

Note: The button Execute is in the control window, if the option Acknowledge is checked in the object configuration in the process D2000 GrEditor.

5

Maximum step - limit the maximum possible change of the entered parameter (step)

  • button to set the lower limit of possible change from the current value
  • value of the maximum possible change
  • button to set the upper limit of the possible change from the current value


Kotva
nahradne_automaticke
nahradne_automaticke
DEFAULT AUTOMATIC CTRL

...