Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions
Supported device types and versions
This protocol supports data reading and writing to DIRAS devices produced by Paufex s.r.o. Prešov.
Communication line configuration
Communication line category: Serial.
The parameters of asynchronous line are set according to version and type of device
connection.
Communication station configuration
Communication protocol: Paufex DIRAS.
The station address is a decimal number in the range 0 up to 127.
If necessary, the synchronization of real time of station can be enabled.
Station protocol parameters
You can set the following parameters:
Table 1
| Key word | Full name | Meaning | Unit | Default value |
|---|---|---|---|---|
| RC | Retry Count | Number of response retries if some error in communication occurs. | - | 3 |
| MWR | Max Wait Retry | Maximum retries of reading the response until it is completed. | - | 8 |
| RT | Retry Timeout | Delay between the response retry if some error in communication occurs. | ms | 1000 millisec. |
| WT | Wait Timeout | Delay between readings the response until it is completed. | ms | 400 millisec. |
| WFT | Wait First Timeout | First waiting for response after sending the request. | ms | 500 millisec. |
String containing the protocol parameters is being defined as follows:
Key_word=value;Key_word=value; ...
Example:
RC=1;RT=500;
If there is used a keyword with an invalid value in the initialization string, there will be used corresponding default value according the table 1.
I/O tag configuration
I/O tags: Ai, Ao, Ci, Co, Di, Do, TiA, ToA, TiR, ToR.
The address requires three parameters: type, number and reference.
The values are set in hexadecimal format:
- Type – 0 up to FF
- Number (Nr) – 0 up to FFFF
- Reference (Ref) – 0 up to FF
Data reading and writing
Data reading is done in the individual references by the message 02. Message 03 is used to write a new value to the reference.
A real time may be read / written also with the I/O tag - TiA (or ToA) with address Type=FF,Nr=FFFF,Ref=FF. Message 0B ensures the real time reading real time and Message OC the real time writing.
Literature
-
Changes and modifications
- 21.1.2000 – Testing the communication
Document revisions
- Ver. 1.1 – February 8, 2000 – Updating
Related pages:
Pridať komentár