Supported device types and versions
Literature
Document revisions

Supported device types and versions


HART protocol is not directly implemented in D2000 yet. To communicate with a HART device it is possible to use one of the HART/Modbus converters by Papouch (www.papouch.com):

A HART communication with an Endress + Hauser Proline t-mass A 150 heat flow meter has been deployed into production. The device communicated using a HART protocol version 6 with the HART ETH converter, on the D2000 side using the MODBUS Client protocol on the TCP/IP-TCP line. Following commands were implemented:

The HART ETH converter from Papouch works as follows:

The composition of HART commands, parsing of HART responses, and reading values into user variables were programmed by the means of ESL language.
If interested in this protocol and the relevant ESL scripts, please contact the D2000 development department.

Literature



You can read blogs about HART protocol: Communication - HART, Modbus and a Parrot


Document revisions


Communication protocols