Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions
The protocol supports reading data from the Remia KME concentrator. Internal number of REMIA protocol is 206.
The protocol supports reading of instant values as well as 1 and 15 minute archives of measurements from electrometers, which KME obtains:
The protocol also supports reading of instant values of binary data and values of 16-bit counters.
Configuration dialog box of station - the tab "Protocol parameters".
Table 1
| Key word | Full name | Meaning | Unit | Default value |
|---|---|---|---|---|
| Wait Timeout | Timeout to receive a response or one of its fragments. | s.ms | 1.5 s |
| Fragmented answer is expected | The response may consist of several UDP packets (fragments). | - | False |
| Actual Data Object ID | The address of the object (16-bit number) that contains information about the current values (analogs). A value of 0 disables reading of the current values as well as their 1 and 15-minute archives. | - | 8 |
| 15min Archive Data Object ID | The address of the object (a 16-bit number) that contains information about 15-minute values. A value of 0 disables reading of 15-minute values. | - | 5 |
| 1min Archive Data Object ID | The address of the object (a 16-bit number) that contains information about 1-minute values. A value of 0 disables reading of 1-minute values. | - | 9 |
| Binary data Object ID | The address of the object (a 16-bit number) that contains information about binary values. A value of 0 disables reading of binary values. | - | 0 |
| Number of EMs | The number of electrometers (1-255) whose instant data from impulse measurement (instant counter value, instant power, average power since the start of the current time interval, validity of the meter's data) are in response to reading the Actual Data Object ID, and whose historical data 1 and The 15-minute minutes (end-of-period counter value,, average power per period) are in response to reading 1min Archive Data Object ID and 15min Archive Data Object ID. | - | 41 |
| Number of EIs | The number of meters (1-255) whose instant data from IEC communication (instant counter value, numbers of last 3 accumulations, counter values for the last 3 accumulations) are in response to reading the Actual Data Object ID, and historical data (last accumulation number, counter value for the last accumulation) are in response to reading 1min Archive Data Object ID and 15min Archive Data Object ID objects. | - | 6 |
| Number of values in EI | The number of measurements (1-255) in the EI section (data from IEC communication) in response to reading the Actual Data Object ID, 1min Archive Data Object ID a 15min Archive Data Object ID objects. | - | 16 |
| Number of word counters | The number of 16-bit counters (0-255) whose values are in response to reading the Actual Data Object ID object. | - | 0 |
| Debug Packet Binary Contents | Activates advanced debugging with listing of binary data being sent and received. | YES/NO | YES |
| Debug Values | Activates advanced debugging with listing of I/O tag values. | YES/NO | NO |
I/O tag types: Ai, Ci, Qi, Di, TiA.
The address of I/O tag can have different forms.
For electrometers in the EI structure - i.e. electrometers obtained by IEC communication - it has the form EI.EiNr.EiInd.EiParam where:
Examples of addresses:
EI.1.1.AV
EI.3.13.N1
For electrometers in the EM structure - i.e. electrometers obtained by measurement of impulses - it has the form EM.EmNr.EmParam where:
Examples of addresses:
EM.2.CA15
EM.1.OV
EM.4.CA1
EM.5.CA
EM.40.PV
EM.40.PV1
For binary data - read from the object with address Binary data Object ID - it has the form DI.WrNr.BitNr.DiParam where:
Examples of addresses:
DI.2.10.INP
DI.1.0.INP
DI.3.14.PPO
For instant values of 16-bit counters - read from the object with address Actual Data Object ID - it has the form EW.EwNr where:
Examples of addresses:
EW.1
EW.47
-
-