When porting a D2000 application developed for Windows to Linux, you may encounter the following differences:

• File names and paths are case-sensitive
• Directory separator is "/" (slash)
• File access rights (owner/group/others)

When patching D2000 binaries, the following steps should be performed

• owner/group should be changed to the D2000 user and group under which the D2000 system was installed, e.g. 
  chown d2000:d2000 kernel
• read/write/execute flags should be set so that at least the D2000 user can run them, e.g.
  chmod 755 archiv
• D2000 Kernel process requires special capabilities to create multicast sockets: 
  setcap cap_net_raw=pe kernel
• D2000 Kom process may require special capabilities to work with raw sockets, to bind to privileged ports and to work with GPIO:
  setcap cap_dac_override,cap_sys_rawio,cap_net_bind_service+ep kom