Process alarm states
Process alarms can occur in various states. An overview of these states is described in the following table.
| Object state | Cause |
|---|---|
| Normal (NoAlarm) | The condition to raise the process alarm is not met. |
| Alarm | The condition to raise the process alarm has been met. |
| Acknowledged | The operator acknowledged the process alarm. |
| Blocked | The alarm is blocked by the operator, or the Silent parameter has been checked at the alarm configuration in the D2000 CNF process. |
| Unacknowledged | The condition to finish the alarm, for an acknowledgement-required status alarm, has been met before it is acknowledged. |
Related pages:
0 komentárov