Vidíte historickú verziu tejto stránky. Pozrite si aktuálnu verziu.

Porovnať s aktuálnou verziou Zobraziť históriu stránky

« Predchádzajúce Verzia 2 Ďalej »

A graph can display the flows of up to 99 object values. The tab Objects in the dialog box is used for configuration of flows.

To configurate the selected object, open the window Detail by double click. 

Objects

List of objects to display their flows in the graph. The list consists of the following columns:

Nr.Serial number of the object. The number is also in the header of Object configuration dialog box.
O.Order of the object drawing. It is set in the Object configuration dialog box - parameter Drawing order.
Object nameObject name (the parameter Object name in the Object configuration dialog box).
Type

Graphic flow type with the drawing mode mark placed before (the parameters Types of graphic flow and Drawing in the Object configuration dialog box).

Note: For additive/subtractive types of flows, the column also shows the number of ancestor of the given flow (see the parameter Ancestor in object configuration).

Example:

0/-No fixed ancestor defined, the system cannot find any object as a correct ancestor (given flow is the first additive/subtractive graphic flow in the list of objects).
0/1No fixed ancestor defined, the nearest object to be its ancestor is the object with the serial number of 1 (automatically found by the system).
2The ancestor defined - the object with the serial number of 2.
Axis/Level
Level

Number of object's level.

Options:

0Level value is generated automatically so that the graph can have its own level (such levels are displayed bellow ALL levels with explicitly specified level values).
Exceptions:
  • additive objects belong to the same level as the first additive object
  • points lying on the same digital axis belong to one level
1..99Any of these numbers will assign a graph to a particular level, which, if the option is activated, will be displayed in order from the top to the bottom of the graph window depending on the rising level value, i.e. levels with higher level values will be displayed bellow levels with lower level values.
Color(s)Drawing colors as well as additional information (the parameters Color, Style, Width and Pattern in the Object configuration dialog box).
Technical unitsTechnical units of the object (the parameter Units in the Object configuration dialog box).
VisibilityInforms about showing/hiding the parameters in the graph window. These parameters are checked in the configuration window Detail. 
DescriptionObject description (parameter Description in the Object configuration dialog box).

Change order

 Hold and move the iconto change the order of objects in the list. The order defined in the list will be displayed in the graph table.

Insert

Allows to add a new object into the graph. Clicking the button opens the Object configuration dialog box that enables to define settings for displaying the object values in the graph.

Edit

Dialog box Object configuration is opened by selecting of required object and clicking on Edit button, or double clicking of left mouse button on this object.

Point on the line, not Structured Array, can be edited by double clicking of right mouse button.

Delete

Deletes the selected object.



Note: The caption Active graph is displayed in the tab if at least one object of the list is active object (see the parameter Active graph object in the Object configuration dialog box).

Related pages:

Configuration of graphs
Object configuration

  • Žiadne štítky