...
| Kotva | ||||
|---|---|---|---|---|
|
...
A client connecs connects to the OPC server by using the parameter ProgID defined during the OPC Server installation. Its form is Ipesoft.D2000.OPCServer.<server_name>. If the OPC client enables to set the OPC standard, select OPCDA 2.0 , because OPCDA 1.0 is not supported by the D2000 OPC Server.
An OPC client can support the following types of OPC servers: InProc, Local, Remote. If the OPC client is running on the same computer as the server, set the type Local. If it is running on a remote computer, set Remote and enter the name of the computer with running OPC server into the parameter Host (it depends on OPC client).
...