...
| Bit | Meaning |
|---|---|
| 0 | some warnings W1-W5: |
| 1 | W6 - Motor cooler has reached an increased temperature (over 75 °C). For VQFREM 400 005, 007, and 011 types, the module temperature is over 90 °C |
| 2 | W7 - The converter switches itself into scalar mode due to IRC/ARC failure. |
| 3 | W8 - Signalisation of reverse direction of IRC/ARC. |
| 4 | F7 - The time needed for motor field suppression has not expired yet (before subsequent start). |
| 5 | W12 - Process regulator is saturated. Converter frequency has reached its maximum value. |
| 6 | F9 - Position calibration initiated by 9.4.3 command, or calibration of IRC encoder on the synchronous motor. |
| 7 | F11 - The speed decreased to zero by activating a software terminal switch. |
| 8 | F8 - Dynamic deceleration was activated as a result of a sharp decrease in speed. |
| 9 | W16 - Sensored motor temperature has achieved nonpermissible value. |
| 10 | W17 - If EWCP,(M),(I) panel is active (2.4.1)and the connection with the converter has failed. |
| 11 | F2 - Maximal current regulator (par.13.3.1) is active. It limits the current to the value of parameter 9.10.1 |
| 12 | F3 - The converter is in kinetic backup mode after input power failure. |
| 13 | F4 - The converter is processing the frequency for the spinning motor. |
| 14 | F5 - Sleep function of process regulator. |
| 15 | F6 - Braking unit is active. |
...