| Parameter | Meaning | Units | Default value |
|---|
| Maximum count of request retries. If no reply returns after a request had been sent, the station will be in the status of 's status will change to a communication error. | - | 2 |
| Timeout before resending a request if no reply had not has been received. | ms | 500 |
| Delay The delay after sending the request and before reading the response. | ms | 200 |
| Delay The delay between the reply readings. | ms | 200 |
| The maximum number of retries of the reply reading. | - | 30 |
| Send only valid data to the D2000 System. If it is set on YES, the Invalid values are not sent to the system. | YES/NO | YES |
| Filtering of data with a timestamp at least this value hours in the future. The setting to 0 hours disables this filter. | 0-168 hours | 24 |
| Filtering of data with a timestamp at least this value days in the past. The setting to 0 hours disables this filter. | 0-730 days | 31 |
| Extra debug information about communication on the line including debug information about all gained I/O tag values. | YES/NO | NO |