Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Description  
Communication line configuration
Communication station configuration
Configuration of interfaces
I/O tag configuration
Literature
Changes and modifications
Document revisions

...

MDIS device protocol is used to control input-output peripherals and hardware of watchdog of devices produced by the MEN company.

Kotva
komunikacna_linka
komunikacna_linka
Communication line configuration

...

Station protocol parameters

ParameterDescriptionDefault value
Kotva
fd
fd
Full Debug
Logging is enhanced with listings that enable fast error detection.NO
Kotva
io
io
I/O Interface Name
Unique text identifier of interface with binary input-outputs.z17_9
Kotva
wd
wd
Watchdog Interface Name
Unique text identifier of the interface of HW watchdog.xm01bc_1
Kotva
ctrl
ctrl
Control Interface Name
Unique text identifier of the interface that is used to configure other interfaces.z17_1

Kotva
rozhrania
rozhrania
Configuration of interfaces

...

The configuration of MDIS5 interfaces is possible through Device Manager of Windows OD, tab on the "MDIS5 devices" tab.

Types of interfaces can be identified by their name. Binary IO peripheral is a device called 16Z037_GPIO. The name of the configuration interface is 16Z034_GPIO. In Device Manager, you may find more devices of the same name. Therefore, you should display the properties to identified identify the particular interface. This interface should be placed in "cham-slot 2(is instance 2)" (see figure below). Next interface is HW watchdog, its name is XM01BC.

MDIS5 configurationImage Modified

Each of these devices can be addressed via its unique identifier. The modification of identifier can be done in "Device Manager -> MDIS device -> Properties -> "Device Settings" tab.

Device settingsImage Modified

Kotva
merany_bod0
merany_bod0
I/O tag configuration

...

Possible I/O tag types: Ai, Ao, Ci, Co, Di, Do.

Addresses of digital inputs 1-8: DIx, e.g. DI1, DI2 .. DI8

Addresses of digital outputs 1-8: DOx, e.g. DO1, DO2 .. DO8

Addresses related to watchdogs:

AddressDescription
WD_TIMESet / query the watchdog time (in milliseconds)
WD_ACTIVESet / query the watchdog status (0-inactive, 1-active)
WD_SHUTDOWNSTATESet / query the shutdown status (0 - watchdog shot, 1-watchdog didn't shoot)
WD_TRIGGERActivation (triggering ) of the watchdog

Kotva
literatura
literatura
Literature

...

Kotva
revizie
revizie
Document revisions

...

  • Ver. 1.0 – 13.5.2015 - the creation of the document
Info
titleRelated pages:

Communication protocols

...