...
Description
Communication line configuration
Communication station configuration
Configuration of interfaces
I/O tag configuration
Literature
Changes and modifications
Document revisions
...
MDIS device protocol is used to control input-output peripherals and hardware of watchdog of devices produced by the MEN company.
| Kotva | ||||
|---|---|---|---|---|
|
...
Station protocol parameters
| Parameter | Description | Default value | ||||||
|---|---|---|---|---|---|---|---|---|
| Logging is enhanced with listings that enable fast error detection. | NO | ||||||
| Unique text identifier of interface with binary input-outputs. | z17_9 | ||||||
| Unique text identifier of the interface of HW watchdog. | xm01bc_1 | ||||||
| Unique text identifier of the interface that is used to configure other interfaces. | z17_1 |
| Kotva | ||||
|---|---|---|---|---|
|
...
The configuration of MDIS5 interfaces is possible through Device Manager of Windows OD, tab on the "MDIS5 devices" tab.
Types of interfaces can be identified by their name. Binary IO peripheral is a device called 16Z037_GPIO. The name of the configuration interface is 16Z034_GPIO. In Device Manager, you may find more devices of the same name. Therefore, you should display the properties to identified identify the particular interface. This interface should be placed in "cham-slot 2(is instance 2)" (see figure below). Next interface is HW watchdog, its name is XM01BC.
Each of these devices can be addressed via its unique identifier. The modification of identifier can be done in "Device Manager -> MDIS device -> Properties -> "Device Settings" tab.
| Kotva | ||||
|---|---|---|---|---|
|
...
Possible I/O tag types: Ai, Ao, Ci, Co, Di, Do.
Addresses of digital inputs 1-8: DIx, e.g. DI1, DI2 .. DI8
Addresses of digital outputs 1-8: DOx, e.g. DO1, DO2 .. DO8
Addresses related to watchdogs:
| Address | Description |
|---|---|
| WD_TIME | Set / query the watchdog time (in milliseconds) |
| WD_ACTIVE | Set / query the watchdog status (0-inactive, 1-active) |
| WD_SHUTDOWNSTATE | Set / query the shutdown status (0 - watchdog shot, 1-watchdog didn't shoot) |
| WD_TRIGGER | Activation (triggering ) of the watchdog |
| Kotva | ||||
|---|---|---|---|---|
|
...
| Kotva | ||||
|---|---|---|---|---|
|
...
- Ver. 1.0 – 13.5.2015 - the creation of the document
| Info | ||
|---|---|---|
| ||
...