Porovnávané verzie

Kľúč

  • Tento riadok sa pridal
  • Riadok je odstránený.
  • Formátovanie sa zmenilo.

...

Full nameDescriptionUnitDefault value
Kotva
subrpi
subrpi
Requested Publishing Interval

Defines the time interval for server to send the information about the change of monitored items within the instance subscription by "Publish message".
Note: The This parameter defines a proposed value which the OPC UA server can change the value, e.g. Bernecker-Rainer always returned a value of "Publishing Interval" at least 50 ms, although the requested interval was smaller.

mi:ss.mss00:05.000
Kotva
subrlc
subrlc
Requested LifeTime Count

If the client does not send the request for data till the time defined by (Requested LifeTime Count * Requested Publishing Interval), the subscription expires. The value should be minimally 3 times higher than the "Requested Max KeepAlive Count".
Note: The This parameter defines a proposed value which the OPC UA server can change the value, e.g. Bernecker-Rainer always returned as a value of "LifeTime Count" a maximum of 600, although the requested value was greater.

Number1000
Kotva
subrmkc
subrmkc
Requested Max KeepAlive Count

If the objects of subscription are not changed, the server will send keep-alive message after elapsing the time (Max Notifications Per Publish * Requested Publishing Interval). The client will confirm this message when it sends a new request for data.
Note: The This parameter defines a proposed value which the OPC UA server can change the value, e.g. Bernecker-Rainer has always returned as a value of "Max KeepAlive Count" a maximum of 200, although the requested value was greater.

Number5
Kotva
mnpp
mnpp
Max Notifications Per Publish
Parameter defines the maximum number of notifications about the object change, which the server can send in one "Publish message". Zero indicates that the number of notifications is unlimited.Number0
Kotva
pe
pe
Publishing Enabled
Parameter enables/disables the publishing within the subscription.YES/NO0
Kotva
p
p
Priority
It defines a relative priority of one subscription. If server should send more notifications, the subscription with higher priority is preferred.0-2550
Kotva
mqs
mqs
Samples Queue Size
This parameter enables to create the object queue with the defined length on OPC UA server's side for each monitored item in subscription.Number0

...