...
The protocol supports reading data from electrometers (active and reactive energies) that were collected by ABB Microscada system and published via files.
The files are expected to have a name in a format coding both the date and the time Dyyyymmddhhmi.CSV, e.g. D201706301247.CSV.
The files are read with the time parameters (period, delay) configured on the station's Time parameters tab.
The protocol only supports data readout.
...
- Input file - full path to the file or directory with data..
- Archive directory - - path to the directory, where the processed files are archived. It is a mandatory parameter . The D2000 KOM process archives the processed files in subdirectories of the archive directory with names that copy the first 9 characters of the name of the processed file name (D yyyymmdd, i.e. one subdirectory for every day).
...
- Communication protocol "ABB Elektro".
- Station The station address is not configured.
- Time parameters: In a particular specific case, the polling period was 15 minutes with an offset of 360 seconds.
...
| Parameter | Description | Unit | Default Value | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Dalay Delay after processing of a file. The parameter can be useful if the communication has been offline for a longer time, i.e. a larger number of files are accumulated and their fast processing could flood the system. | s | 0 |
...
I/O tag address is an integer 16-bit number (1-65535) specified as a decimal number or as a hexadecimal number with a hash at the beginning (e.g. #0A).
It defines a an electrometer number of electrometer, which is written specified on every line of a data file.
This is an example of the first 15 rows of a specific file (I/O tag addresses would be 1-15):
...