HOPF 7515 communication protocol
Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
List of implemented commands
Literature
Changes and modifications
Document revisions
| Kotva | ||||
|---|---|---|---|---|
|
...
- Communication line category: Serial, SerialOverUDP Device Redundant, RFC2217 Client.
- The parameters of SerialOverUDP Device Redundant line are described here.
Note: You can configure IP address and port of the backup device and use the redundant connection of two HOPF servers. - The parameters of serial line:
- Baud rate: 9600 Baud
- Parity: None (none, otherwise according to the setting of the card 7515)
- Number of data bits: 8
- Handshaking: none
- The defined parameters are standard. They may be changed by DIP switches on the card 7515).
- Card 7515 directly supports the output to a serial port, or you can use RS422 interface together with RS244/RS232 converter.
...