| Parameter | Default value | Meaning |
|---|
| YES | Both received and sent data are written to the log file. |
| 0000 | PIN code of SIM card (GSM modem). |
| YES | A semicolon is inserted at the end of the ATD command. |
| YES | Enable to hang up the incoming call in a defined time. |
| 35 sec | Defines the duration of an incoming call. |
| 3 sec | Some of the modems do not inform about change of status: "ringing -> received", "ringing -> hung up". In "ringing" status, the flags that indicate ringing are sent. If during the interval configured by this parameter, the ringing is not indicated, the status automat of the protocol will change its status to "hang up". Zero disables to use this indication. |
| 3 sec | The time after which the outgoing call is terminated. |
| 600 sec | After elapsing of this time, the modem is reinitiated. |
Acknowledgment of Receipt | YES | Whether the receipts acknowledgments are enabled when sending SMS messages. |
| +421905303303 | Phone number of the service center for SMS messages.
Slovakia O2: +421 949 909 909
Slovakia Orange: +421 905 303 303
Slovakia Telecom (T-Mobile): +421 903 333 000 |
| 60 sec | Interval of checking the received messages and receipts in the modem. |
| YES | Indicates whether a device sends the answer "OK" after dialing the phone number. |
Reinit On Every Operation | NO | Modem reinitialization before every SMS sending and before every dialing. If this parameter has the value NO, then the modem is initialized at the beginning of work and regularly according to the value of the Modem Is Ready Interval parameter. |
| NO | Querying signal quality before every SMS sending and before every dialing. The detected signal quality is not shown anywhere and can only be found in the communication line logs. |