...
The figure below shows the ESL script editor window. Each script opens is opened in its own tab.
1 | Toolbar. |
2 | The |
breakpoint is set when debugging a script . |
3 | The source text of the script - individual actions that form the script. |
4 | The part of the script editor that contains the following displaying:
|
Clicking on the tab the following popup menu occurs:
- Tabs on the top - if the option is checked, the tabs occur at the top, otherwise the tabs are at the bottom.
- Move right - moves the tab one position to the right.
- Move left - moves the tab one position to the left.
- New window - opens the tab in a separate window.
- Close tab - closes the tab over which the popup menu was displayed (Ctrl+W closes the current tab).
- Show picture - opens the edited picture and minimizes the ESL script. The option is available only for the script of active picture, for the script of event is unavailable.
Notes:
A title bar of tab window and CNF (if the window is maximized) contain the name of active tab. If the tab window is minimized or hidden and the new script is opened the tab window will be displayed again. The insertion point is on the area for editing of the current tab.
5 | Status bar |
6 | Minimap for fast navigation in code |
Notes:
When the script editor is closed all the tabs will be closed and the window will hide.
...
- script of the active picture (opened in D2000 GrEditor) does not display the question of whether to save the script providing that there was were made some changes (the script is occupied by the edited picture),
- script of the event (opened in D2000 CNF or D2000 GrEditor) displays the question of whether to save the script providing that there was were made some changes
Keyboard shortcuts:
...
...
ESL
...
ESL editor features:
...
- Automatic color differentiation of key wordskeywords: .
- Automatic color differentiation of texts: correctly written: , incorrectly written: .
- Semantic coloring - different colors for local, global, predefined and scheme variables, different colors for objects, procedure names etc...
- Static code analysis
- After a successful Syntax check:
- Typing the symbol '^' after the name of an object of Structured variable type or after the name of a local variable of RECORD type shows the list of all structure columns with the column number and description. The columns are listed in alphabetical order.
- Pointing the mouse cursor to a local variable, or a structured variable item displays information about its type and the place where it is declared (in the debugging mode, the value of the variable is shown).Right-mouse click above identifier (local variable, procedure name) opens the local popup menu containing the only item - Go to definition - after clicking the item the cursor is automatically moved to the declaration of the identifier.
- Typing the symbol '^' after the name of an object of Structured variable type or after the name of a local variable of RECORD type shows the list of all structure columns with the column number and description. The columns are listed in alphabetical order.
- After an unsuccessful Syntax check or Compilation, double-clicking an error from the lists of errors (5) moves the mouse cursor to where the error occurred. Another possibility for navigation between errors or warnings is by clicking on an icon in the upper right corner of the editor, which is shown when there are some errors or warnings. After clicking on this icon, a line with an error is shown with an error description. Every other click on the icon shows the next error/warning.
- Pressing F1 (help) when the cursor is pointed to the name of a function/action opens the help document for the given function/action/picture event.Automatic display of function description and types of parameters. If user enters the function name and the first bracket in script editor the window will appear where the function and its parameters are described. Parameter is highlighted in dark blue color when you proceed to the new parameter.
Example:
Automatic display of action and its parameters. If user enters the action name and presses the button SPACE the window with action's declarations will be shown in editor.
Examples:
When you write an object identifier (picture object identifier or system server event identifier) and the symbol "]" after it the list of RPC procedures and interface, defined for this object, will display. The selected definition of procedure or interface will be added to script editor.
Example:
When entering the symbol "^" after the interface name, the list of procedures, defined for this interface, displays. The selected definition of procedure will be added to script editor.
Example:
View of RPC procedure description called in ESL script. This property allows to write the description of RPC procedures which is visible in a different script. The comments and parameters of RPC procedure are shown in ESL script. The description can consist of one or - Quick navigation in a script using a minimap (code outline). To move quickly in the script, you can click and drag the gray part in the minimap to move the currently displayed part of the script in the editor. The minimap contains highlighted pieces of code, such as the line with the cursor position. In the case of a failed syntax check or compilation, error lines are highlighted here in red, or warning lines are highlighted in orange. After placing the cursor in the editor on a local variable or procedure, all occurrences of the given variable/procedure within the script are displayed in gray behind the slider.
- Automatic suggestions occur under the following conditions:
- After entering the "\" character after the object or variable, when a list of object attributes is displayed
- After entering the character "^" if this character is located after an object of type structured variable or after a local variable of RECORD type
- Autocompletion and suggestions in the editor after pressing the CTRL + SPACE keyboard shortcut. After pressing CTRL + SPACE again, it is possible to display a more detailed description (function - description of function, action - syntax for action, variables - description of variable, constants - description of constant). It is possible to navigate in the list of suggestions using the arrows, after pressing ENTER the given action, variable, function, constant, or attribute will be added. Based on the conditions described below, it contains a list of proposals:
- If there is a space in front of the cursor in the editor, actions, variables, functions, and constants are suggested
- If the cursor is preceded by a text beginning with "%", the functions are suggested, and the list of suggestions is filtered based on the text after "%"
- If the cursor is preceded by a text beginning with "_", the proposed variables (local, global, and schema variables in the case of a schema script) are filtered, and the list of suggestions is filtered based on the text before the cursor.
- If the cursor is preceded by a text beginning with "@", constants are suggested, and the list of suggestions is filtered based on the text after "@"
- If the cursor is preceded by a text beginning with a-zA-Z, action keywords are suggested
- If the line starts with the keyword of the action, the current options will be displayed first in the list, followed by all the options for completion provided by the editor (variables, functions, constants).
- If an object identifier (schema object or system event server identifier) is specified for the CALL action, RPC procedures and interfaces that are defined for the object are proposed.
- Automatic display of function parameters after entering the function name and the first parenthesis. The currently typed parameter is underlined and highlighted. The popup with the description of the function parameters can be displayed even after placing the cursor in the editor between the function parameters and pressing the keyboard shortcut CTRL + SHIFT + SPACE
- After typing the "^" character after the interface name, a list of procedures that are defined for that interface is displayed. After selecting an item from the list, the procedure definition is added to the ESL Editor.
- Preview the definition or references of a local variable and procedure, without the need to change the position in the script. By activating, the nested editor is displayed in the desired position with the possibility of editing, while previewing references, it is possible to gradually switch between individual occurrences in the right part. This functionality is invoked via the popup menu Peek → Peek Definition (ALT + F12) or Peek → Peek References.
- Folding / unfolding parts of the script such as: procedure body, BEGIN-END, IF-ELSE, IF-ELSIF, IF-ENDIF, FOR-END_LOOP ... The icons for folding/unfolding are located to the right of the line number, while the icons for folding are shown only if we move the cursor over this part of the editor.
- more rows, the empty row is not allowed. The declaration of procedure have to follow the description (without the empty rows). The description starts with a character ";", like the comments.
Example of description:
Example of display:
Automatic indentationKotva odsadenie odsadenie
When writing the ESL script and moving on to the new line, the ESL editor automatically indents the current line (according to the first non-zero line) and move moves the cursor on the given position. The indent size is automatically detected from the current script, but can also be adjusted in the status bar (Figure area 6).
Features of automatic indentation:- When moving on the to a new line after the action (e.g. selected actions (eg RPC, PROCEDURE, PUBLIC, FOR, DO_LOOP, IF ...) in the ESL editor, the text is automatically indented by 2 characters to the right from the previous linethe defined size.
- When moving on the to a new line after the action (e.g. selected actions (eg END_LOOP, ENDIF ...) in the ESL editor, the text is automatically indented by 2 characters a defined size to the left from of the previous line.
- When pressing Ctrl+iyou press CTRL + K and then CTRL + F, the selected highlighted text is formatted according to the previous settings. For this action is important the indentation properties. The indent of the first line within in the selected lines.
- marked set of lines is decisive for this action.
- Pressing SHIFT + ALT + F will format the entire text
- Column text selection is possible by pressing SHIFT+ALT and then by dragging the mouse
Basic keyboard Keyboard shortcuts:
Causes theShortcut Action CTRL+F1 Display the complete list of actions together with keyboard shortcuts F1 Display editor help, if the cursor is over the function name, help for the function is displayed CTRL+SPACE Show suggestions CTRL+SHIFT+SPACE Show quick info for procedure and function parameters CTRL+K CTRL+C
,Comment current line
current selection of lines to be commented.or
SHIFTcomment selected block of text CTRL+
KK CTRL+ U Removes the comment of current line, or current selection of lines. CTRL+F Displays the dialog box to search or to replace a text in the script.
GoesUncomment the current line or uncomment a selected block of text CTRL+/ Toggle a comment on the current line SHIFT+ALT+A Add/remove a comment from the current selection CTRL+F2 Rename all occurrences F2 Rename a symbol within its validity CTRL+F Search in the script ENTER Find another occurrence SHIFT+ENTER Find the previous occurrence SHIFT+ALT+F Format the entire script CTRL+K CTRL+F Format the selected area CTRL+F12 Go to definition CTRL+G
given line in the text.Go to CTRL+i Indents the selected rows in the script. The indentation of the first row of the selected part of script is the decisive. line ALT+F8 Go to the next problem SHIFT+ALT+F8 Go to the previous problem SHIFT+F12 Go to references CTRL+SHIFT+O Go to symbol - displays the option to go to functions, variables, parameters defined in the script CTRL+SHIFT+F8 Check script syntax CTRL+F8 Compile the script CTRL+S Compile and save the script CTRL+S For active picture script - saving the picture.
For script of an object of Event type - saving.CTRL+1 Opens a list of D2000 system objects. CTRL+2 Opens a list of predefined constants. CTRL+3 Opens a list of functions. CTRL+4 Opens a list of actions. CTRL+5 Opens a list of local variables. CTRL+6 Opens a list of value attributes of an object or local variable. CTRL+~ ESL script editor will complete automatically a written word according to next suitable one (from cursor position) and later according to its type (function, constant, action, ...). To add other adequate words press the button repeatedly. CTRL+> Shows tool tip in ESL script editor even if the automatic tool tip is switch off.F8 Switch to debug mode
Popup menu
...
The popup menu containing these items can be displayed over the script source text (part 4 on the picture). Click by right mouse button or push the Menu key on the keyboard.
- Go to definitionDefinition - cursor is automatically moved to the declaration of the identifier. When using "Go to definition" on the remote procedure (RPC/PUBLIC), the ESL editor automatically opens the script, which contains the definition of procedure, and moves the cursor on the definition.
- Go back - cursor is moved back on the place where "Go to definition" had been called from. It keeps the last 50 callbacks "Go to definition".
- Go forward - cursor is moved on the place where it was before "Go back" calling. "Go back" and "Go forward" are supported even between the different ESL scripts. ESL editor automatically chooses / opens the ESL scripts
- Tool tip - enables / disables displaying of a tool tip.
- to References (SHIFT + F12) - a nested editor is displayed with the option to switch between the individual references of the local variable/procedure.
- Go to Symbol... (CTRL + SHIFT + O) - a selection box with filtering of all symbols (local variables, procedure parameters, procedures) is displayed, after selecting the symbol and pressing the ENTER key the cursor is moved to the symbol definition.
- Peek - here are two options:
- Peek Definition (ALT + F12) - the nested editor is displayed at the position of the local variable/procedure definition.
- Peek References - a nested editor is displayed with a reference to a local variable/procedure, with a list of individual references in the right part.
- Rename Symbol (F2) - renames the name of the local and global variable defined in the script within its scope.
- Change All Occurrences (CTRL + F2) - this allows replacing all occurrences of the specified text within the script.
- Format Document (SHIFT + ALT + F) - adjusts the formatting of the document, applying the currently set indentation.
- Editor settings - displays the ESL editor settings dialog (font and colors)Fill missing procedures - adds the missing procedures (with an empty body) defined in ESL Interface which have been declared in ESL script. If menu opens by right-click over declaration of used ESL Interface, only its procedures will be added. Otherwise, the procedures of all ESL Interfaces declared in ESL script will be added.
- Show All Instances - shows the list of all running instances of the edited ESL script.
- Editor Settings... - shows ESL editor settings dialog (fonts and colors).
- Edit object - if the text under the mouse cursor is a valid object name, the option enables to open it for editing.Cut (CTRL + X) - copies the selected content to the clipboard and removes it from the editor,
- Copy (CTRL + C) - copy selected text into copies the selected content to the clipboard,Cut
- Paste (CTRL + XV) - delete selected text,Paste pastes the contents of the clipboard.
- Command Palette (CTRL + V) - paste selected text from clipboard.
...
- F1) - displays all available actions in the editor
Editor settings
General settings
Allows user personalize editor by modifying various settings
Static analysis
Allow user enable/disable different types of code validations and set their severity. Severity affects how error is displayed in editor
Color settings
For better orientation in the ESL script, the editor uses a different coloring scheme for each type of the individual text tokens. Default coloring parameters can be modified using ESL editor settings dialog.There are three editor color themes - dark, light and high-contrast theme.
...
ESL Editor within String detects the references to the dictionary. If some reference to a dictionary (key), which has not been defined yet, is identified, it will be colored as an Error (see the dialog above).
...