Inštalačný program D2000 nainštalujeThe D2000 installer will install:
- súbory produktu D2000
- skripty pre management aplikácií, archívov a D2000 procesov
Poznámka |
---|
Inštaláciu a konfiguráciu je nutné vykonávať ako užívateľ |
Konfigurácia PostgreSQL prístupových práv
- product files
- scripts for application management, archives and D2000 processes
Poznámka |
---|
Installation and configuration must be performed as a |
Configuration of PostgreSQL access rights
Edit the PostgreSQL configuration file Upravte PostgreSQL konfiguračný súbor /var/lib/pgsql/data/pg_hba.conf
(umiestnenie sa môže líšiť v závislosti od inštalácie) tak, že vložíte podčiarknuté riadkylocation may vary depending on installation) by inserting underlined lines:
...
# "local" is for Unix domain socket connections only
...
host all all 127.0.0.1/32 ident
Poznámka |
---|
Riadky pre špecifického užívateľa Lines for a specific user (dba) , ktorého používa D2000, sa musia nachádzať pred riadkami pre všetkých užívateľov who uses the D2000, must precede the lines for all users (all), inak sa neuplatniaotherwise, they do not apply. |
Konfigurácia PostgreSQL pre prevázdkovanie D2000 v redundancii
V prípade prevádzkovana D2000 v redundancii je potrebné aby databázový server bol sieťovo dostupný zo záložného servera, takže je potrebné:
takes into account the first line, which meets the conditions of the connection type, database and user, or IP addresses specified in the first columns.) |
PostgreSQL configuration for D2000 operation in redundancy
In the case of running D2000 in redundancy, the database server must be network accessible from the redundant application server, so it is necessary:
1) to add a rule (where 1) pridať aj pravidlo (kde aa.bb.cc.dd
je IP adresa záložného servera is the IP address of the backup server):
# IPv4 local connections:
...
host all all 127.0.0.1/32 ident
2) nastaviť PostgreSQL databázový server tak, aby príjmal spojenia na vonkajších sieťových rozhraniach (viac info na to set up the PostgreSQL database server to accept connections on external network interfaces (more on https://www.postgresql.org/docs/current/runtime-config-connection.html). V súbore In file /var/lib/pgsql/data/postgresql.conf
(umiestnenie sa môže líšiť v závislosti od inštalácie) nastavíme parameter (location may vary depending on installation) set the parameter to listen_addresses
#------------------------------------------------------------------------------
...
listen_addresses = '0.0.0.0' # what IP address(es) to listen on;
Po úprave reštartujte PostgreSQL príkazomAfter editing, restart PostgreSQL with the command:
Blok kódu | ||
---|---|---|
| ||
systemctl restart postgresql |
Vytvorenie užívateľa pod ktorým bude aplikačný server D2000 bežať
Creating a user under which the D2000 application server will run
Create a new user by the commandNového užívateľa vytvorte príkazom
Blok kódu | ||
---|---|---|
| ||
adduser <username> |
kde <username> je vami zvolené meno užívateľa. Neskôr, v priebehu inštalácie budete dotázaní na meno užívateľa s ktorého právami bude D2000 bežať, zadajte tohto užívateľa.
Spustenie inštalácie D2000 aplikačného servera
where <username> is your chosen username. Later, during the installation process, you will be asked for the name of the user with whose rights the D2000 will run, enter the chosen user.
Start the D2000 application server installation
The D2000 Linux installation is performed from an installation package named Inštalácia D2000 Linux sa vykonáva z inštalačného balíčka s názvom d2000-<verzia>-x86_64-linux-bin.tar.gz
- Balíček nakopírujte do pracovného (naprCopy the package to the working directory (e.gr.
/tmp
) adresára - In the working directory, run the command V pracovnom adresári spustite príkaz
tar -xvzf
pre rozbalenie. Po skončení príkazu sa v pracovnom adresári nachádza podadresár d2000-<verzia>. After the command is completed, there is a subdirectory in the working directoryd2000-<verzia><version>-x86_64-linux-bin.tar.gz
, v ktorom sú umiestnené súbory potrebné na inštaláciu D2000. which contains the files needed to install the D2000.d2000-<version>-x86_64-linux-bin
Go into this subdirectory and run the
./doinstall
script. The installation wizard startsPremiestnite sa to tohto podadresára a spustite skript./doinstall
. Spustí sa sprievodca inštaláciou.Blok kódu language text theme Emacs [root@localhost d2000_v12.0.060.b01-x86_64-linux-bin]# ./doinstall ------------------------------- Copyright (c) 2017 IPESOFT Ltd. www.ipesoft.com This script will install the D2000 application server. You can find a complete log of the installation in "/tmp/d2000_install.20171121T232413.log". Please press ENTER to continue.
Po stlačení ENTER sa inštalátor bude pýtať na parametre inštalácie.
...
After pressing ENTER, the installer will ask for installation parameters.
Parameters of installation
Blok kódu | ||||
---|---|---|---|---|
| ||||
Choose D2000 instance name ('?' for list all installed instances) [d2000]: |
Zvoľte meno inštalovanej inštancie D2000. Na jednom počítači môže byť nainštalovaných naraz niekoľko nezávislých inštalácii (inštancií) aplikačného servera D2000. Aby ich bolo možné rozlíšiť, je potrebné inštanciu pomenovať. Východzie meno je d2000. Ak zadáte '?', zobrazia sa mená už nainštalovaných inštanciíChoose a name for the installed D2000 instance. Several independent installations (instances) of the D2000 application server can be installed on one computer at a time. To distinguish them, it is necessary to name the instance. The default name is d2000. If you enter '?', the names of already installed instances will be displayed.
Blok kódu | ||||
---|---|---|---|---|
| ||||
In which directory do you want to install D2000? [/opt/d2000]: |
Zvoľte cieľový adresár inštalácie. To tohto adresára budú nainštalovaé programové súčasti D2000Select the installation destination directory. The D2000 program components will be installed in this directory.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Enter D2000 applications directory [/opt/d2000/app]: |
Zvoľte adresár, do ktorého budú umiestňované aplikácie D2000 vytvorené v rámci tejto inštancieSelect a directory, into which will the created D2000 applications be placed within this instance.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Enter D2000 log directory [/opt/d2000/log]: |
Zvoľte adresár, do ktorého budú umiestňované logySelect a directory, into which will the logs be placed
Blok kódu | ||||
---|---|---|---|---|
| ||||
Enter D2000 user: |
Zvoľte meno linuxového užívateľa, pod ktorým bude bežať systém D2000.Select a name for the Linux user under which the D2000 system will run.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Enter D2000 group: |
Zvoľte meno skupiny, pod ktorou bude bežať systém D2000Select a name a group under which the D2000 system will run.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Local IP address 1 [192.0.2.1]: Local IP address 2 [192.0.2.2]: |
The D2000 server pre svoju prevázdku potrebuje poznať IP adresu(-y) počítača. Adresy zmeňte ich iba v prípade nesprávnej autodetekcieneeds to know the IP address (es) of the computer for its operation. Change addresses only in case of incorrect autodetection.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Enter path to postgresql bin [/usr/pgsql-9.6/bin]: |
Cesta k Path to the PostgreSQL bin adresáru. Cestu zmeňte iba v prípade nesprávnej autodetekciedirectory. Change the path only if the autodetection is incorrect.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Systemd postgresql service name [postgresql-9.6.service]: |
Meno služby PostgreSQL v systemd. Cestu zmeňte iba v prípade nesprávnej autodetekcie.
The name of the PostgreSQL service in systemd. Change the path only if the autodetection is incorrect.
After filling in the parameters, the installer will display a summaryPo vyplnení parametrov inštalátor zobrazí zhrnutie:
Blok kódu | ||||
---|---|---|---|---|
| ||||
======================= Ready to install the D2000 application server: Instance name: d2000 Install dir: /opt/d2000 Applications dir: /opt/d2000/app Log dir: /opt/d2000/log User: root Local IP address 1: 192.0.2.1 Local IP address 2: 192.0.2.2 psql executable: /usr/pgsql-9.6/bin/psql Systemd postgresql service: postgresql-9.6.service ======================= Proceed (yY|nN)? [y]: |
Ak chcete inštaláciu prerušiť, zadajte If you wish to stop the installation enter 'n'.Ak si želáte pokračovať a vykonať inštaláciu s nastavenými parametrami, zadajte 'y', inštalátor dokončí proces inštalácie
If you wish to proceed and execute the installation with preset parameters, enter 'y' and the installer will complete the installation process.
Blok kódu | ||||
---|---|---|---|---|
| ||||
Proceed (yY|nN)? [y]: y Creating directory "/opt/d2000"...done Copying files...done Installation complete. |
V tomto momente je systém D2000 nainštalovaný.
...
At this point, the D2000 system is installed.
You can continue by creating an application, archive, or remote process.
Poznámka |
---|
If you are going to apply the D2000 patches to your installation, read the Specific differences between Linux and Windows. |