...
MODBUS RTU MASTER supports data reading from the analyzers Circutor CVMk analyzers.
Kotva |
---|
| komunikacna_linka |
---|
| komunikacna_linka |
---|
|
Communication line configuration
...
- Communication line category: Serial.
- Parameters of the asynchronous line depending on the design and type of device connection – see literature about Circutor.
Kotva |
---|
| komunikacna_stanica |
---|
| komunikacna_stanica |
---|
|
Communication station configuration
...
- Communication protocol: MODBUS Circutor CVMk.
- Station The station address is a decimal number in the range of 0 up to 255 specified as a decimal number or as a hexadecimal number with a hash at the beginning (e.g. #1A).
Station protocol parameters
There can be defined the following parameters:
Table 1
Key wordKeyword | Full name | Meaning | Unit | Default value |
---|
| Retry Count |
Number of retry calls when The number of request retries when an error in communication occurs. | - | 2 |
| Retry Timeout | Delay between |
retry calls request retries if an error in communication occurs. | ms | 200 millisec. |
| Wait First Timeout | First waiting |
on for the response after sending a |
callrequest. | ms | 100 millisec. |
| Wait Timeout | Delay between the readings of a response until it is completed. | ms | 100 millisec. |
| Max Wait Retry |
Number retry response reading retries until |
it the response is completed. | - | 15 |
String with protocol parameters is written according to this rule:
Key_word=value;Key_word=value;...
Example:
RC=1;RT=500;
If a key word keyword with a valid value has not been found in the initial string, the default value is used according to Table 1.
I/O tag configuration
...
I/O tags: Ai
Address – decimal a number in the range of 0 to 65535 – number of MODBUS double register. It can be specified as a decimal number or a hexadecimal number with a hash at the beginning (e.g. #0ABC).
The values are read by 2 registers and interpreted as a 4-byte integer. The addresses of values are described in the literature about Circutor.
...
Document revisions
...
- Ver. 1.0 – May 9, 2000 – the creation of the document
...