Porovnávané verzie
porovnané s
Kľúč
- Tento riadok sa pridal
- Riadok je odstránený.
- Formátovanie sa zmenilo.
Declaration
| Blok kódu | ||||
|---|---|---|---|---|
| ||||
unsigned int _stdcall WritePointValue(struct PointPar * Pt, unsigned int *FastAdr, unsigned int * RdValue) |
Parameters
| Pt | Pointer to PointPar structure. |
| FastAdr | I/O tag address converted to a 32-bit number. |
| RdBack | Pointer to a Boolean value of the request attribute of the function ReadPointValue. The function ReadPointValue is called after finishing the I/O tag initialization. |
Description
The function InitPoint (_InitPoint@12 in the Stdcall calling sequence) is optional. A pointer to a PointPar structure with a definition of the I/O tag parameters is the parameter of the function. The function is called at starting of the process D2000 KOM process and later after a change of the I/O tag parameters in the process D2000 CNF process. If it is required to save the I/O tag address converted to a 32-bit number into the list, the numerical address is to be saved into the parameter FastAdr. If the address is not converted, the constant FastAdrNotUsed is saved into the parameter FastAdr. For more info on addresses see the topic addresses of stations and I/O tags.
Return code
| Code | Description |
|---|---|
| RQ_OK | Request has been executed. |
| RQ_ERR | An error occurred (device does not communicate or is out of order, or there is any error). |
| RQ_IGNORED | The function was ignored and the station status is not changed. |