...
Value type selection of the eval tag. Admissible value types are listed in the following table.
Identification | Eval tag value type |
---|---|
De | Logical value |
Ce | Integer value |
Ae | Analog value |
TmA | Absolute Time |
TmR | Time interval - relative time |
Technical units
Technical units of the eval tag. Maximum: 12 characters. Possibility to use the Dictionary (to open press CTRL+L).
...
Technological limits may be defined for eval tags of the Ce - integer, Ae - analog and TmR - time interval type. There are four limits: VHL, HL, LL and VLL. Limit may be specified either directly - by entering a value into the input field, or its value may be defined by a system object (dynamic limit) - the button placed right from the input field.
VHL | Very High Limit - the highest limit |
HL | High Limit - high limit |
LL | Low Limit - low limit |
VLL | Very Low Limit - the lowest limit |
Values of individual limits determine the state of the eval tag according to the value. The relation eval tag value - limits gives 6 possible states.
Limit | Object state according to relation Value- Limit |
---|
Above VHL (object value > VHL) | |
VHL |
Above HL (HL < object value < VHL) | |
HL |
Normal (LL < object value < HL) |
LL |
Bellow LL (VLL < object value < LL) | |
VLL |
Bellow VLL (object value < VLL) |
As the limits can be dynamic (determined by the object value), a situation may occur, when the condition VLL<LL<HL<VHL is not met (the limits crossing). The eval tag is then in the state Limit Problem.
...
Time delay (in seconds) for the evaluation of process alarm. Process alarm is raised, if a cause of raising the alarm is valid at least within this period.
Note: the time delay is applied only to status alarms - transition alarms occur immediately when the value is changed.
Block alarms
Enabled Block Alarm option blocks the evaluation of process alarms.
...
Example:
Structured variable SV.Production consists of 10 rows and 3 columns.
Column | Type | Meaning |
---|---|---|
ProductsALL | Int | Number of products |
Rejects | Int | Number of rejects |
ProductsOK | Int | Number of good-quality products |
Obviously the following equation can be formed:
ProductsOK = ProductsALL - Rejects
...
Time offset of the basic time interval (hour:min:sec). It is defined only for the periodical evaluation method of the eval tag.
Use monotonic time
...
Maximum density of evaluation [s]
...