...
A client connecs to OPC server by using the parameter ProgID defined during the OPC Server installation. Its form is Ipesoft.D2000.OPCServer.<server_name>. If the OPC client enables to set the OPC standard, select OPCDA 2.0, because OPCDA 1.0 is not supported by the D2000 OPC Server.
OPC client can support the following types of OPC serverservers: InProc, Local, Remote. If OPC client is running on the same computer as the server, set the type Local. If it is running on a remote computer, set Remote and enter the name of the computer with running OPC server into the parameter Host (it depends on OPC client).
...