...
It is a UDP port, to which the KOM process is bound and where the data from the serial server is received. Local Port must correspond to the serial server configuration (the parameter Port in the line where IP address with KOM process is set). A local UDP port must be unique, neither another line nor any application (out of the D2000 System) can use it on a computer where the D2000 KOM process is running.
- Primary Device - Host + Port
IP address or hostname of a serial server. It is a UDP port that receives the data transmitted by the D2000 KOM process. The Port value must correspond to the serial server configuration (the parameter "Local Listen Port").
Note: it is possible to specify an address * or ALL (for IPv4 protocol) or [*] or [ALL] (for IPv6 protocol) that causes data to be received from any device, but sending data is disabled. This feature is useful e.g. in combination with the Generic User Protocol.
...
Check this option if you use a redundant configuration of the serial servers.
- Backup Device - Host + Port
IP address or hostname of a backup serial server. It is a UDP port that receives the data transmitted by the D2000 KOM process. The Port value must correspond to the serial server configuration (the parameter "Local Listen Port").
...