...
This protocol analyzes the files containing measurement data about measurement according to the IEC 62056 international standard IEC 62056.
Kotva |
---|
| komunikacna_linka |
---|
| komunikacna_linka |
---|
|
Communication line configuration
...
- Communication line category File I/O (communication by via files).
Communication line configuration parameters File I/O communication line configuration parameters:
- Input file - complete path to the file or directory with data.
In the case of analyzing the particular file, its size is tested with a period of 1 secsecond. If the file does not increase in size during two consecutive periods, it is processed.
If a directory is entered (in case of a Win32 platform Win32 with reverse solidus a backslash (\) at the end), all files that match the mask are processed (see station protocol parameters).
- Archive directory -path to the directory, where the processed files are archived. If the directory is not setspecified, the processed files will be cancelleddeleted.
Kotva |
---|
| linka_parametre |
---|
| linka_parametre |
---|
|
Communication line protocol parameters
...
Dialog window communication line configuration - tab Protocol parameters, select the protocol "IEC62056-21:2002 File I/O" protocol.
Table 1
Parameter | Description | Unit | Default value |
---|
| Analyzed profile. | - | P.01 |
Gorlitz PRM62 Module | Files from device Gorlitz PRM62 are analyzed. | YES/NO | NO |
Archive Subdirectory Time Mask | Mask for generation of creating subdirectories in the main archive directory according to time of file processing or time stamp timestamp of the file (if the Input file is the entered parameter specifies a directory). | - | rrrrmmdd |
Formatted Codes (Annex C) | Numerical addresses of I/O tags are used according to the specification of standard IEC62056-21 standard, Annex C. If numerical addresses are used, the station addresss address is then acquired from the value of the object with address D000, time stamp the timestamp is acquired from the value of the object with address C001. | YES/NO | NO |
External Command File 1, 2 | Complete The complete path to a periodically called external command file (.cmd). It is used only if a non-empty value has been configured. It is possible to configure two independently executed command files with different periods. | - | - |
External Command File Period 1,2 | Call period of the external command file 1 or 2. | mi:ss | 1:00 |
Call External Command File 1,2 Synchronously | Call external command file 1 or 2 synchronously. | YES/NO | YES |
Ext. Command File After Activation | Complete path to the external command file wich which is launched at change of redundancy status to HS. It is called only once and always synchronously. It is used only if a non-empty value has been configured. | - | - |
| Show debug information about processed files. | YES/NO | YES |
| Show debug information with the content of processed files. | YES/NO | YES |
| Show debug information with measured values of the measure points. | YES/NO | YES |
| Period of input directory content check (if the input file is a directory). | mi:ss | 1:00 |
Unknown Files Backup Directory | File, where unknown files are saved (if the input Input file is directory). If it is not written, the files will be cancelled. The unknown files are the files inconvenient to mask (see station protocol parameters) or the station with required device number was not found. | - | - |
| Time data filter. If the time stamp of acquired values is different from current time more than stated number of hours in future, they are ignored. Enter 0 (zero) to ignore time filter. | hours | 24 |
| Time data filter. If the time stamp of acquired values is different from current time more than stated number of hours in past, they are ignored. Enter 0 (zero) to ignore time filter. | days | 31 |
Abnormal Timestamp Data Dir | Directory where the files with ignored data by time filter will be saved (Future Data Filter and History Data Filter). | - | - |
| Timeout, it is inserted after the file was analyzed. | ss.mss | 0.100 |
| Error file to write information about errors during processing (unknown file in directory, too old or too new values). Empty value means that this error file will not be created. | - | - |
...