...
- FAG_ID - ID of FAG device, which corresponds with row index of device in SV.FAG.SmartCheck.Parameters structure.
- JobName - Name of the job according to the configuration in the web interface.
- Signal - Name of the signal within the job according to the configuration in the web interface.
- CurrentValue - Measured signal value at the last measurement.
- AlarmType - Alarm type for the signal.
- No-Alarm - No alarm.
- Pre-Alarm - Pre-Alarm.
- Main-Alarm - High Alarm.
- PreAlarmLevel - The value at which the Pre-Alarm is triggered. This value can be configured using the web interface.
- MainAlarmLevel - The value at which the Main-Alarm is triggered. This value can be configured using the web interface.
- PreAlarmCount - Number of Pre-Alarms for the signal.
- MainAlarmCount - Number of Main-Alarms for the signal.
Web interface - Job configuration
SV.FAG.SmartCheck.Alarms structure:
If interested in this protocol, please contact the D2000 development department.
...