Johnson Controls N2-Bus protocol
Supported device types and versions
Communication line configuration
Communication station configuration
Station parameters
I/O tag configuration
Time Schedules configuration
Literature
Changes and modifications
Document revisions
Kotva | ||||
---|---|---|---|---|
|
...
Note: on TCP-IP/TCP line, multiple host names or IP addresses separated by comma/semicolon can be defined, to connect to multiple devices in round-robin fashion.
...
The address of I/O tag can define in two formats:
1. Predefined items DX9100 has format: Kotva preddef_itemy preddef_itemy
...
Tag: Name of tag.
Description: Short description of item.
Access: Access level (R - read-only, R/W - read and write, CNF - read and write, the configuration parameter is recorded into EEPROM).
Type: Value type of item (see also here).
Address: Physical address of item that is used for reading/writing. It is calculated from the starting address of module and offset tag (in hexadecimal format). The bit number (1 up to 32) of the addresses of binary items is placed after dot.
...