Parameter | Default value | Meaning |
---|
| LPEX | Type of processed files - LPEX (*.lpx) or MPX (*.mpx). |
| Datum | Column name containing the date. |
| Zeit | Column name that contains time data. |
| ZPB | Column name that contains a value address. |
| EinHeit | Column name that contains a unit of a measured value (or IMP for a KSP value type). |
| Werte | Column name that contains the measured values. |
| Kennzahl | Column name that contains a value type (AP+ ,AP- ,AQ+ ,AQ-, KSP). |
| MPDauer | Column name that contains a granularity of measurements [min]. |
| 30 | Defines maximum count of columns, that are scanned when data acquisition. |
| ; | Value separator in the header and body. |
| dd.mm.rr | A mask for the conversion of the date in the text format to an internal date. In the case of MPX files, the mask is ignored. |
| hh:mi:ss | A mask for the conversion of time in the text format to an internal time. In the case of MPX files, the mask is ignored. Note: time in LPEX, as well as the MPX file, is presumed to be in the wintertime. |
|
| Directory for storing the batch files (e.g. unpacked ZIP archive). |
|
| Only for OpenVMS. Directory (e.g. DKA0:[IFAZD]) containing the batch files TESTZIP.COM and UNZIP.COM. |
| ftp_download.com | Batch file for downloading data from the FTP server. |
| deltmp.com | Batch file for deleting temporary files (FTP_DELETECMD, MAKE_TESTZIP.COM, MAKE_UNZIP.COM). |
| GOEONL{rrrr}-{mm}-{dd}-{hh}-{mi}-{ss}.zip* | Time and date mask for the name of the ZIP file. If the parameter is empty, it is assumed that LPEX or MPX files are located in the directory specified by the parameter Directory for Unzipped files. |
| GOEONL_{rr}{mm}{dd}{hh}{mi}.lpx* | Time and date mask for the name of unzipped LPEX files. If MPX files are processed, their name must match mask *{yy}{mm}{dd}{hh}{mi}.mpx or at least *{yy}{mm}{dd}{hh}{mi} e.g. ETREN_03_1805151136.mpx
|
Directory for Unzipped files | DKA200:[000000.IFAZD.UNZIPPED] | Directory, from which the unzipped LPEX or MPX files will be read. |
| 2Rove | Directory on the FTP server that contains ZIP files. |
| 10.11.1.131 | Name/IP address of the primary FTP server. |
| 10.11.1.131 | Name/IP address of the secondary FTP server. |
| azdinterface | FTP user name on both the primary and secondary FTP servers. |
| *** | FTP user password on both the primary and secondary FTP servers. |
| 30 | If the downloading or deleting of files on the FTP server took longer than this setting, this information is written into the log file of the KOM process. |
Active Energy Tech. Units | MWH | Technical units of active energy. |
Reactive Energy Tech. Units | MVARH | Technical units of reactive energy. |
| 1 min | The expected time interval of all values. If the value in the processed file in the "Interval Name" column is higher than "Expected Interval", the value of energy will be evenly split into several intervals of "Expected Interval" size. The value 0 disables this feature. |
Hour Subdirectories in Archive | NO | The parameter activates the archiving of processed files in subdirectories according to the hours within the day (i.e. 00 to 23). In the case of a large number of processed files, further work with them is simplified. |
Analyze Archived Files on Startup | YES | When starting, the KOM process inspects old data sources to recalculate the value of electrical work. Note: if the "Hour Subdirectories in Archive" parameter is activated, only old files from the last hour will be inspected. |
| NO | Analyzes also the files that are older than "Maximum File Age". |
| 3 hod | If the interval is exceeded, the values are either ignored or processed as Old Values, depending on the "Send Old Values" parameter. |
Debug unknown and lost tags | NO | Enables displaying warnings about addresses of measurement points with missing I/O tags. |
| NO | All values from communication (even old ones) go to the system as new values. |