...
At first, you have to specify the input configuration file in the initial window. There are two files you may choose from - the default configuration file file (D2install.xml) or own file.
The default configuration file D2install.xml contains the default settings of the system. This file is used when choosing the option "Default configuration".
The configuration tool enables both the manual and automatic configuration. When you click on the "Next" button, the manual configuration will be done. It means , the user is guided through all the necessary dialogs in which he may specify the system settings.
The "Install" button starts the automatic configuration according to the chosen configuration. The user cannot However, with this method of configuration, the user does not have the option to change the configuration parameters. There These will be used those from the defined exclusively according to the selected configuration file.
A The user has three options:
- Use the default configuration (D2install.xml) and manually pass the configuration guide.
- Specify the own configuration file and manually pass the configuration guide.
- Specify the own configuration file and automatically configure the D2000 System without the guide.
When selecting the automatic configuration, all the steps that configure the system are skipped and the final configuration is started (see the section "Final configuration").
All the steps below will be done, when selecting the manual configurationIn the manual configuration, the user will be guided through all the following steps.
Manual configuration
In the installation guide you could chose one of the following types of installation:
...
Each type of installation requires the different system settings. Therefore, the installation guide is different for each installation. The steps of configuration depend on the type of installation and the marked parameters in the single dialog boxes.
...
Each rectangle represents one or more configuration catalogs dialogs for the setting of system parameters. The configuration proceeds according to the arrows. The upper point represents the start position, i.e. the configuration dialog in which you have to choose a type of installation. The end point endpoint represents a final configuration as per the settings.
...
In this dialog window, you define the mask of the network and the path to the basic directories necessary for the D2000 System operation:
- Application – the directory to which all files necessary for application will be stored.
- Logging – the directory that will contain the information about the process activity of processes.
This dialog allows to set setting a type of licence used in the D2000 System.
Type of licencelicense
Allows to choose one of the following items:
- Demo
- Basic
- Standard
- EntepriseEnterprise
Licence file
If a the user enters a license file, it is copied to the correct location. Selecting The choice of a license file is not requiredmandatory. The choice of a license file is optional, in the case of a the Demo license type Demo it is not available accessible at all.
| Kotva | ||||
|---|---|---|---|---|
|
Support programs
The options define which dialog is used to set up the installation of support programs , necessary for running of some parts of D2000 System, are to be installedthe D2000 system. If some of the options the option to install a program is checked, this the program will be installed after finishing the configuration is completed. If some of the items an item is checked and disabled, it means that the given program is installed present on the your computer and need not be installed againno further installation is required.
Use hardware keys / Use software keys
Specifies the type of license keys that will be used for authentication in the D2000 System.
| Kotva | ||||
|---|---|---|---|---|
|
It requires to set the Requires the setting of connection to the D2000 Serverserver. It This is either an IP/Computer name or name of the redundant group. This setting is determined will be used for all configured clients.
...
| Kotva | ||||
|---|---|---|---|---|
|
This dialog window enables to define which support programs are to be installed for the client processes. It is the support for HW keysThe dialog box allows you to set up the installation of support programs for client processes, namely the installation of hardware key support.
| Kotva | ||||
|---|---|---|---|---|
|
In this dialog window user may set the shortcuts of the important processes of D2000 System and their placement. The final configuration will contain all links that are checked in the column "Add shortcut". If any parameter is not checked, no shortcut will be created in This dialog box sets the presence and location of links to important D2000 processes. All links that have the "Add link" check box selected will be added to the resulting configuration. The link location setting is applied to all clients that have this parameter checked.
If no parameter is selected under the "Location" or "Add link" section, no link will be added to the computer.
Double A double click on the a particular client process opens the a dialog window in which the user may change its relative location ("Name" item) and the start parameters ("Parameters" item).
...
| Kotva | ||||
|---|---|---|---|---|
|
Next step enables The dialog allows you to configure the remote D2000 processes of D2000 System. If you check the checkbox . A checked box in the "Install" column means that the given process will be created.
Double click over -clicking on the remote client to open the line opens a configuration dialog box, in which the user may set next parametersits parameters can be set.
The detailed exact parameters of the remote client are described in the D2000 System Configuration Reference Manualsystem documentation.
Confirming a configuration
...
Before the final configuration, you must confirm the configuration.
The user may start the application In this dialog box, the user has the option to run the configured application (if he decided to create it), or save the final resulting configuration file for further usageuse.
Regardless of user decision, the final configuration is always stored to the folder D2Install in a target directory where is an instance of The resulting configuration is saved in each case (whether the user decides to save or not) to the D2Install folder in the destination directory of the instance installation.
| Kotva | ||||
|---|---|---|---|---|
|
The final configuration process is done automaticallyautomatic. In the A dialog windowbox appears, which informs the user can see the information step by step about each step of configuration . It also displays the information about the success action that is performed. Either the success information or failure of the given stepaction is displayed.
After finishing the configuration, the Complete button button to close the guide is enabled. In this step the instance of D2000 System is installed, configured and ready for use.
When the configuration is complete, the Complete button is available to close the configuration tool. In this step, the D2000 instance is installed, configured, and ready to use.
| Info | ||
|---|---|---|
| ||
...