...
- for Value type = Unsigned Int:
- Bool
- TwoBit
- FourBit
- SixBit
- Unsigned Byte (1B)
- Unsigned Short (2B)
- Unsigned Int (4B)
- Unsigned Long (8B)
- for Value type = Signed Int:
- Signed Byte (1B)
- Signed Short (2B)
- Signed Int (4B)
- Signed Long (8B)
- for Value type = Float:
- Short Float (2B)
- Float (4B)
- Double (8B)
- for Value type = String:
- String (14B)
- for Value type = DateTime:
- Date Time (8B)
Note: I/O tags that have the Output mode parameter set to Command in the Output control tab will not be read. In the KNX protocol, there are common objects that can be written to but not read from, so reading would end with an error that would invalidate the I/O tag value in D2000 - such I/O tag must be configured as a Command.
...
- Ver. 1.0 - May 14th, 2020 - document creation.
- Ver. 1.1 - July 11th, 2022 - support for reading of DPT_TimeOfDay, DPT_Date, DPT_DateTime.
- Ver. 1.2 - July 18th, 2023 - support for writing of DPT_DateTime.
| Info | ||
|---|---|---|
| ||
...