Date: Fri, 29 Mar 2024 06:23:33 +0100 (CET) Message-ID: <822327010.111482.1711689813694@srvdoc.doc.ipesoft.com> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_111481_821043016.1711689813693" ------=_Part_111481_821043016.1711689813693 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Supported device types and versio=
ns
Communication line c=
onfiguration
Communic=
ation station configuration
I/=
O tag configuration
Literature=
Changes and modifications=
a>
Document revisions
This protocol supports data reading from the dataloggers INMAT 64 and IN= MAT 65 produced by ZPA Nov=C3=A1 Paka (Czech republic).
Note:
A device sends data spontaneously (without the request for data). A delay =
between the transmitted data blocks is 5 seconds.
They are not used.
I/O tags: Ai
The address can be entered as a decimal number or a hexadecimal number w= ith a hash at the beginning (e.g. #A).
The value meaning:
Address | Cycle | Meaning | Units |
---|---|---|---|
0 | 1 | Heat output | GJ/hour |
1 | 1 | 1/4 hourly maximum | GJ |
2 | 1 | Heat output sum | GJ |
3 | 1 | Instantaneous mass flow rate | t/hour |
4 | 1 | Mass flow rate sum | t |
5 | 1 | Temperature | =C2=B0C |
6 | 1 | Temperature difference [=C2=B0C] - INMAT 64 or O= perating pressure [MPa] - INMAT 65 | - |
7 | 2 | Heat output | GJ/hour |
8 | 2 | 1/4 hourly maximum | GJ |
9 | 2 | Heat output sum | GJ |
10 | 2 | Instantaneous mass flow rate | t/hour |
11 | 2 | Mass flow rate sum | t |
12 | 2 | Temperature | =C2=B0C |
13 | 2 | Temperature difference [=C2=B0C] - INMAT 64 or O= perating pressure [MPa] - INMAT 65 | - |
-
-
Related pages: