Ping Protocol

Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Supported device types and versions

The protocol is used to determine the network availability of devices using the ICMP Ping service. Although this functionality is already in the D2000 Server process (see system structure SV._System_NetStatus), a separate implementation in the D2000 KOM process has the following advantages:

• Support for the "Retry Count" parameter: multiple repetitions of the challenge (so the I/O tag does not go to the False state immediately after the failure to receive a single response).
• The possibility of pinging even in networks that are not available for the D2000 Server (eg D2000 KOM running in the DMZ).

The protocol supports pinging using names/addresses in both IPv4 and IPv6 protocols.

Communication line configuration

• Category of communication line: API

Communication station configuration

• Communication protocol: Ping Protocol.

• The station address is not specified.

Station protocol parameters

Communication station - configuration dialog box - "Protocol parameters" tab.
They influence some of the optional parameters of the protocol.

Table 1

I/O tag configuration

Possible I/O tag types: DI

Addresses of I/O tags:

• IPv4 address: e.g. 172.16.0.1 or 8.8.8.8
• IPv4 symbolic name: e.g. myD2server or www.google.com
• IPv6 address: e.g. fe80::d898:43fa:9371:da32 or [fd00::2]
• IPv6 symbolic name: e.g. [myD2server] or [www.google.com]

If the address starts with %IGNORE, the I/O tag will be ignored.

Literature

https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol

https://en.wikipedia.org/wiki/ICMPv6

Changes and modifications

-

Document revisions

• Ver. 1.0 – Mach 5, 2024 – creating a document