SENDINMC communication utility
Description
Parameters
Return codes
Examples
Default configuration files
Changes and modifications
Document revisions
Description
The sendinmc.exe program is used for sending data messages via the INMARSAT-C satellite terminal.
Parameters
Command-line parameters:
sendinmc [-E] [-T] [-F] [-p Port] [-C cnffile] [TO: address] ["message"] [-M messfile]
| Parameter | Meaning |
|---|---|
| [-E] | Parameter for sending an e-mail. If the parameter [-C cnffile] is not defined, the default configuration file cnfmail.txt is automatically being searched in the working directory. * |
| [-T] | Parameter for sending a message to a terminal. If the parameter [-C cnffile] is not defined, the default configuration file cnfterm.txt is automatically being searched in the working directory. * |
| [-F] | Parameter for sending a fax message. If the parameter [-C cnffile] is not defined, the default configuration file cnffax.txt is automatically being searched in the working directory. * |
| [-p Port] | Serial port, to which the INMARSAT-C is connected. If the parameter is not defined, the COM1 port will be used. |
| [-C cnffile] | Configuration file for sending data. |
| [TO: address] | Address (e-mail, or several e-mails comma-separated, telephone number, fax number, terminal number). |
| ["message"] | Message to send (e-mail, fax, data for terminal). If a sequence \n is in the message, the sequence will be replaced by the characters CR and LF. |
| [-M messfile] | Message to send is stored in the file messfile. |
* - The parameters -E, -T, or -F can't be defined, but there must be defined a configuration file using the parameter -C.
For sending a message, either the parameter message or -M messfile must be defined. Parameters are evaluated from the left to the right.
Return codes
| Return code | Meaning |
|---|---|
| 0 | OK, error-free data transmission |
| 1 | Incorrect or missing parameter, the program lists the error specification. |
| 2 | Serial port error (doesn't exist, busy, etc.). |
| 3 | INMARSAT-C terminal is not connected to a given port. |
| 4 | Sending the message was successful but wasn't confirmed by the terminal within the timeout of 4 minutes. |
Examples
Send an e-mail:
sendinmc -E –p COM2 TO: paul@company.sk, joseph@company.sk "This is an email"
Send fax:
sendinmc -F TO: 421895070312 "This is a fax message"
Send a message to a terminal:
sendinmc -T TO: 581492322095 "This is a message to the terminal"
Default configuration files
Default configuration file - cnffax.txt:
; Destination LES ID ; code : <CSI>[LES]b ; LES - 3 character of value in the range 0..363 ; default '115' LES = 115 ; Destination Type
; code : <CSI>[TYPE]e ; TYPE - one character ; default '3' DEST_TYPE = 1 ; Delivery Class ; code : <CSI>[CLASS]f ; CLASS - '0' - immediate delivery, '1' - deferred delivery ; default '0' DELIVERY = 0 ; Delivery Confirmation ; code : <CSI>[CONF]m ; CONF - '0' - no delivery confirmation, '1' - delivery confirmation ; default '0' CONFIRM = 0 ; Message Priority ; code : <CSI>[PRIOR]i ; PRIOR - '0' - normal priority, '1' - distress priority ; default '0' PRIORITY = 0 ; Presentation ; code : <CSI>[PRES]g ; PRES - 3 characters ; default '000' PRESENTATION = 000 ; Service Type ; code : <CSI>[SVCE]d ; SVCE - 2 characters ; default '00' SERV_TYPE = 00 ; Address ; code : <CSI>[ID]c ; ID - 6 characters of destination address ; default '002624' ADDRESS = 000042 ; Address Extension - faxove cislo ; code : <DCS>c;[COUNT];[ADD1]<ST> ; default : not used ADDR_EXT = 421895652094 ; Destination Extension ; code : <CSI>[DEXT]E ; DEXT - 6 characters ; default : not used DEST_EXT = 00T30N
Default configuration file - cnfmail.txt:
; Destination LES ID ; code : <CSI>[LES]b ; LES - 3 character of value in the range 0..363 ; default '115' LES = 115 ; Destination Type ; code : <CSI>[TYPE]e ; TYPE - one character ; default '3' DEST_TYPE = 3 ; Delivery Class ; code : <CSI>[CLASS]f ; CLASS - '0' - immediate delivery, '1' - deferred delivery ; default '0' DELIVERY = 0 ; Delivery Confirmation ; code : <CSI>[CONF]m ; CONF - '0' - no delivery confirmation, '1' - delivery confirmation ; default '0' CONFIRM = 0 ; Message Priority ; code : <CSI>[PRIOR]i ; PRIOR - '0' - normal priority, '1' - distress priority ; default '0' PRIORITY = 0 ; Presentation ; code : <CSI>[PRES]g ; PRES - 3 characters ; default '000' PRESENTATION = 000 ; Service Type ; code : <CSI>[SVCE]d ; SVCE - 2 characters ; default '00' SERV_TYPE = 00 ; Address ; code : <CSI>[ID]c ; ID - 6 characters of destination address ; default '002624' ADDRESS = 002624 ; Address Extension ; code : <DCS>c;[COUNT];[ADD1]<ST> ; default : not used ADDR_EXT = 26245880790003 ; Destination Extension ; code : <CSI>[DEXT]E ; DEXT - 6 characters ; default : not used ; DEST_EXT =
Default configuration file - cnfterm.txt:
; Destination LES ID ; code : <CSI>[LES]b ; LES - 3 character of value in the range 0..363 ; default '115' LES = 115 ; Destination Type ; code : <CSI>[TYPE]e ; TYPE - one character; default '3' DEST_TYPE = 0 ; Delivery Class ; code : <CSI>[CLASS]f ; CLASS - '0' - immediate delivery, '1' - deferred delivery ; default '0' DELIVERY = 0 ; Delivery Confirmation ; code : <CSI>[CONF]m ; CONF - '0' - no delivery confirmation, '1' - delivery confirmation ; default '0' CONFIRM = 0 ; Message Priority ; code : <CSI>[PRIOR]i ; PRIOR - '0' - normal priority, '1' - distress priority ; default '0' PRIORITY = 0 ; Presentation ; code : <CSI&glt;[PRES]g ; PRES - 3 characters ; default '000' PRESENTATION = 000 ; Service Type ; code : <CSI>[SVCE]d ; SVCE - 2 characters ; default '00' SERV_TYPE = 00 ; Address ; code : <CSI>[ID]c ; ID - 6 characters of destination address ; default '002624' ADDRESS = 000581 ; Address Extension ; code : <DCS>c;[COUNT];[ADD1]<ST> ; default : not used ; ADDR_EXT = ; Destination Extension ; code : <CSI>[DEXT]E ; DEXT - 6 characters ; default : not used DEST_EXT = 000000
Changes and modifications
-
Document revisions
- Ver. 1.0 – May 22nd, 2000 – document creation.
Related pages:
0 komentárov